Mode Voice

OSC Out (Oscillator Out)

Set the Wave or Normal Voice output settings for each Drum Key.

 

 

 

 

 

 

 

 

OSC’Out)

Level

InsEF

RevSend

ChoSend

￿

 

Key=C 3

127

thru

64

127

 

 

 

 

 

 

 

 

■Level

Set the output level for each Wave or Normal Voice. This can be used to adjust the output of each Drum Key.

❏Settings: 0 ~ 127

■InsEF (Insertion Effect)

Select the Insertion Effect to which the output of each Drum Key will be sent. If Thru is selected, the Insertion Effects are bypassed.

❏Settings: thru, ins1 (Insertion Effect 1), ins2 (Insertion Effect 2)

■RevSend (Reverb Send)

Set the Send level of the Drum Key signal sent from Insertion Effect 1/2 (or the bypassed signal) to the Reverb effect.

❏Settings: 0 ~ 127

This setting plus the Reverb Send level set in the QED Level screen (Page 66) are the final Reverb Send level settings.

Details about the Effects are given on Page 50.

■ChoSend (Chorus Send)

Set the Send level of the Drum Key signal sent from Insertion Effect 1/2 (or the bypassed signal) to the Chorus effect.

❏ Settings: 0 ~ 127

This setting plus the Chorus Send level set in the QED Level screen (Page 66) are the final Chorus Send level settings.

For a Drum Key with the Insertion Effect set to other than Thru, the Chorus Send level will be determined by the QED Level screen.

Details about the Effects are given on Page 50.

OSC Pan (Oscillator Pan)

Assign Pan settings for each Drum Key in the Drum Voice. Different Pan types are available.

 

 

 

 

 

 

 

OSC’Pan)

Pan

Alter

Random￿

 

 

Key=C 3

C

L63

63

 

 

 

 

 

 

 

■Pan

Set the Pan position for each sound in a Drum Voice (Drum Kit). This will also be used as the basic Pan position for the Alternate and Random settings.

❏ Settings: L63 (Left) ~ C (Center) ~ R63 (Right)

■Alter (Alternate)

Set the amount by which the sound is panned alternately left and right for each note you press. The Pan setting is used as the basic Pan position.

❏ Settings: L64 (Left) ~ 0 (Center) ~ R63 (Right)

This parameter is only available if the Type parameter in the OSC Wave screen is set to “wave.” If set to “vce” (Normal Voice), this parameter is unavailable.

■Random

Set the amount by which the sound is panned randomly left and right for each note you press. The Pan setting is used as the basic Pan position.

❏ Settings: 0 ~ 127

This parameter is only available if the Type parameter in the OSC Wave screen is set to “wave.”

OSC Other (Oscillator Other)

You can set parameters which govern the sound of each Drum Key making up the Drum Voice.

 

 

 

 

 

 

 

OSC’Other)

Assign

RcvNtOff AltGrp

￿

 

Key=C 3

single

on

off

 

 

 

 

 

 

 

■Assign

Set Key Assign to “single” to prevent the doubled playback of the same received notes. Select “multi” to consecutively assign each instance of the same received note to a separate channel.

❏ Settings: single, multi

When the Alternate Group (AltGrp) parameter is set to other than “off,” you cannot set this parameter (shown as “----”).

■RcvNtOff (Receive Note Off)

Select whether MIDI Note Off messages are received by each Drum Key.

❏ Settings: off, on

This parameter depends on the Type of Drum Key Wave chosen in the OSC Wave screen.

■AltGrp (Alternate Group)

Set the Alternate Group to which the Wave is assigned. In a real drum kit, some drum sounds cannot physically be played simultaneously, such as open and closed hi-hats. You can prevent Waves from playing back simultaneously by assigning them to the same Alternate Group. Up to 127 Alternate Groups can be defined. You can also select “off” here if you wish to allow the simultaneous playback of sounds.

❏ Settings: off, 1 ~ 127

90