Mode Performance

■Release

Set the transition time from the point at which the note on the keyboard is released to the point at which the output level of the Part reaches zero. A positive value will lengthen the transition time and a negative value will shorten it.

This parameter is not available for Drum Voice Parts.

❏ Settings: -64 ~ 0 ~ +63

TON Portamento (Tone Portamento)

You can set the following three Portamento parameters for each Part.

Part 1 to 16

 

 

 

 

 

 

 

TON’Portamento)

Switch

Time

Mode

￿

 

Part01

on

127

fulltime

 

 

 

 

 

 

 

Plug-in Part

Multi Plug-in Part

 

 

 

 

 

 

TON’Portamento)

Switch

Time

￿

 

Part17

on

127

 

 

 

 

 

 

■Switch (Portamento switch)

Switch Portamento on or off. With Portamento switched on, there will be a smooth transition in pitch from the first note played to the next note.

❏Settings: off, on

■Time (Portamento Time)

Set the pitch transition time. Higher values mean longer transition times.

❏Settings: 0 ~ 127

■Mode (Portamento Mode)

Select the Portamento Mode. The Portamento Mode behavior varies according to the Part Mode (mono/poly) setting in the LYR Mode screen (Page 117).

This parameter is not available for Plug-in and Multi Plug-in Parts.

❏ Settings: fingered, fulltime

If Part Mode is set to “mono”:

fingered:

Portamento is applied when the keyboard is played legato (a

TON Other (Tone Other)

You can set Pitch Bend Range and Velocity Sensitivity parameters for each Part.

Part 1 to 16

 

 

 

 

 

 

 

TON’Other)

Pitch Bend

VelDepth-Offset

￿

 

Part01

-12 -- +12

127

64

 

 

 

 

 

 

 

Plug-in Part

Multi Plug-in Part

Drum Voice Part

 

 

 

 

 

 

 

TON’Other)

Pitch Bend

VelDepth-Offset

￿

 

PartPL

+12

127

64

 

 

 

 

 

 

 

■Pitch Bend

Set the amount (in semitones) by which the Voice pitch changes when the Pitch Bend Wheel is moved. For example, a Lower setting of -12 means that the pitch of the Voice drops by up to an octave when the Pitch Bend Wheel is moved downwards. An Upper setting of +12 means that the pitch of the Voice rises by up to an octave when the Pitch Bend Wheel is moved upwards.

The Lower parameter is only available for Normal Voice Parts (Parts 1 to 16).

❏Settings:

Lower (Left): -48 ~ 0 ~ +24

Upper (Right):

-48 ~ 0 ~ +24 (or –24 ~ 0 ~ +24 for Plug-in and Multi Plug-in Parts)

■VelDepth-Offset (Velocity Sensitivity Depth/Offset) Set the velocity sensitivity and velocity offset for each Part.

❏Settings:

VelDepth (Velocity Sensitivity): 0 ~ 127

offset (Velocity Offset): 0 ~ 127

VelDepth (Velocity Sensitivity Depth)

As illustrated below, a large setting will cause large changes in velocity when you play the keyboard.

Changes to velocity curve according to VelDepth (with offset set to 64)

Depth=127

Offset=64

Depth=64

note is played before the previous note is released).

full:

Portamento is applied for all playing styles.

If Part Mode is set to “poly”:

Portamento is applied to multiple notes.

Velocity atOffset=64 tone generator

Depth=32

Offset=64

 

 

Depth=0

 

 

Offset=64

 

 

 

 

Offset=64

Received Velocity

 

 

116