Mode Voice
■AMP AEG (Amplitude Envelope Generator) The Amplitude Envelope Generator controls the change in amplitude from the moment a note in pressed on the keyboard to the moment it is released. By setting the Attack Time, Decay 1 Time and the Decay 1/2 Level, you can determine how fast the sound reaches its peak amplitude and how it fades out. Parameters can be set for each Drum Key.
This parameter is only available if the Type parameter in the OSC Wave screen is set to “wave.”
AMP’AEG) Attack
Key=C 3 127 127 127 126
■Attack (Attack Time) Set the Attack Time.
❏Settings: 0 ~ 127
■Decay1 (Decay 1 Time) Set the Decay Time.
❏Settings: 0 ~ 127
■Level (Decay 1 Level) Set the Decay 1 Level.
❏Settings: 0 ~ 127
■Decay2 (Decay 2 Time) Set the Decay 2 Time.
If you select “hold,” the level amplitude will be held until you release the note.
❏Settings: 0 ~ 126, hold
AMP VelSens (Amplitude Velocity Sensitivity)
You can define how the amplitude (output level) varies according to the velocity of the received notes.
|
|
|
|
| AMP’VelSens) | Level | |
| Key=C 3 | +63 |
|
|
|
|
|
■Level
Set the velocity sensitivity of the Amplitude Envelope Generator’s output level. Positive settings will cause the output level to rise the harder you play the keyboard and, conversely, negative values will cause it to fall.
❏ Settings:
Amplitude Envelope Generator Settings
The Amplitude Envelope Generator has three Time parameters and one Level parameter. These govern the transitions between output levels for the duration of a note. The Attack Time is the time taken for the sound to reach its peak output level from the moment a note is played on the keyboard. The Decay 1/2 Time and the Decay 1 Level parameters are used to set the behavior of the remainder (between the sound’s peak output level and the point at which it fades to zero). Furthermore, you can set these parameters to be sensitive to note velocity.
The Attack Level is fixed at its maximum value.
Level | Attack | Decay1 | |
Level | Level | ||
|
Time
Attack | Decay1 | Decay2 |
Time | Time | Time |
Key on
Decay2=hold
Level | Attack | Decay1 | |
Level | Level | ||
|
Time
Attack | Decay1 | Decay2 |
Time | Time | Time |
Key on
Drum Key EQ (Equalizer)
You can set Equalizer parameters for each Drum Key. The following two screens are available. These parameters are the same as for Normal Voices; details are given on Page 86.
EQ Type
EQ Param (EQ Parameter)
This parameter is only available if the Type parameter in the OSC Wave screen is set to “wave.”
92