Mode Utility

M.EQ Low (Master EQ Low)

This Equalizer covers low frequencies. You can adjust the signal level at the specified frequency. You can also select different Equalizer types (Shapes).

 

 

 

 

 

 

 

 

M.EQ Low) Shape

Gain

Freq

Q

￿

 

Vce

peak

+12dB

50Hz

12.0

 

 

 

 

 

 

 

 

■Shape

Select either a Shelving or Peaking equalizer. The Peaking type attenuates/boosts the signal at the specified Frequency setting, whereas the Shelving type attenuates/boosts the signal at frequencies above or below the specified Frequency setting.

❏ Settings: shelv (Shelving), peak (Peaking)

Details about the shapes of the Shelving and Peaking Types are given on Page 111.

■Gain

Set the Gain. This attenuates or boosts frequencies around the Frequency setting.

❏Settings: -12dB ~ 0dB ~ +12dB

■Freq (Frequency)

Set the center frequency. Frequencies around this point are attenuated/boosted by the Gain setting.

❏Settings: 32Hz ~ 2.0kHz

■Q (Frequency Characteristic)

This varies the signal level at the Frequency setting to create various frequency curve characteristics.

❏Settings: 0.1 ~ 12.0

M.EQ LowMid

(Master EQ Low-Middle Range)

M.EQ Mid (Master EQ Middle Range)

M.EQ HighMid

(Master EQ High-Middle Range)

These Equalizers cover low-to-middle, middle and high- to-middle frequency ranges. They can be used to adjust the signal level around the specified frequency.

 

 

 

 

 

 

 

M.EQ LowMid)

Gain

Freq

Q

￿

 

Vce

+12dB

100Hz

12.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

M.EQ Mid)

Gain

Freq

Q

￿

 

Vce

+12dB

100Hz

12.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

M.EQ HighMid)

Gain

Freq

Q

￿

 

Vce

+12dB

100Hz

12.0

 

 

 

 

 

 

 

■Gain

Set the Gain. This attenuates or boosts frequencies around the Frequency setting.

❏Settings: -12dB ~ 0dB ~ +12dB

■Freq (Frequency)

Set the center frequency. Frequencies around this point are attenuated/boosted by the Gain setting.

❏Settings: 100Hz ~ 10kHz

■Q (Frequency Characteristic)

This varies the signal level at the Frequency setting to create various frequency curve characteristics.

❏Settings: 0.1 ~ 12.0

M.EQ High (Master EQ High)

This Equalizer covers high frequencies. You can adjust the signal level at the specified frequency. You can also select different Equalizer types (Shapes).

 

 

 

 

 

 

 

 

M.EQ High)Shape

Gain

Freq

Q

￿

 

Vce

peak

+12dB

0.5kHz

12.0

 

 

 

 

 

 

 

 

■Shape

Select either a Shelving or Peaking equalizer. The Peaking type attenuates/boosts the signal at the specified Frequency setting, whereas the Shelving type attenuates/boosts the signal at frequencies above or below the specified Frequency setting.

❏Settings: shelv (Shelving), peak (Peaking)

■Gain

Set the Gain. This attenuates or boosts frequencies around the Frequency setting.

❏Settings: -12dB ~ 0dB ~ +12dB

■Freq (Frequency)

Set the center frequency. Frequencies around this point are attenuated/boosted by the Gain setting.

❏Settings: 500Hz ~ 16kHz

■Q (Frequency Characteristic)

This varies the signal level at the Frequency setting to create various frequency curve characteristics.

❏Settings: 0.1 ~ 12.0

CTRL (Voice Controller)

You can assign MIDI Control Change Numbers to the controllers and front panel knobs. For example, Knob [1]/[2] can be set to control the amount of effect applied to a sound and the Foot Controller can be set to control modulation. These Control Change Number assignments are known as “Controller Assign.” The following two screens are available.

CTRL Assign1 (Controller Assign 1)

CTRL Assign2 (Controller Assign 2)

132