Mode Voice

■Coarse

Adjust the pitch of each Element in semitones.

❏Settings: -48 ~ 0 ~ +48

■Fine

Fine-tune the pitch of each Element.

❏Settings: -64 ~ 0 ~ +63

■Random

Set the amount by which the pitch of each Element is varied at random for each note you press. A setting of zero means the original pitch is not changed.

❏Settings: 0 ~ 127

PEG VelSens (PEG Velocity Sensitivity)

You can determine how the Pitch Envelope Generator (PEG) responds to note velocity.

 

 

 

 

 

 

PEG’VelSens)

Level

Time-Segment

￿

 

EL1234

+63

+63 attack

 

 

 

 

 

 

■Level

Set the velocity sensitivity of the PEG Level. Positive settings will cause the level to rise the harder you play the keyboard, and negative values will cause it to fall.

❏Settings: -64 ~ 0 ~ +63

■Time-Segment

Set the velocity sensitivity of the PEG’s Time parameters. Use Knob [2] to select the Segment, then use Knob [1] to set its Time parameter. Positive Time settings will play back the specified Segment faster and negative values will play it back slower.

❏Settings (Time): -64 ~ 0 ~ +63

❏Settings (Segment):

attack:Affects the Hold Time/Attack Time/Decay 1 Time

all: Affects all PEG Time parameters

PEG Time

You can set various Time parameters for the Pitch Envelope Generator (PEG). Combined with the PEG Level and PEG Release settings, these can be used control the change in sound from the moment a note is pressed on the keyboard to the moment it is released (Page 77). You can set different values for each Element.

PEG’Time) Hold Attack Decay1 Decay2￿

EL1234 127 127 127 127

■Hold (Hold Time) Set the Hold Time.

❏Settings: 0 ~ 127

■Attack (Attack Time) Set the Attack Time.

❏Settings: 0 ~ 127

■Decay1 (Decay 1 Time) Set the Decay 1 Time.

❏Settings: 0 ~ 127

■Decay2 (Decay 2 Time) Set the Decay 2 Time.

❏Settings: 0 ~ 127

PEG Level

You can set various Level parameters for the Pitch Envelope Generator (PEG). Combined with the PEG Time and PEG Release settings, these can be used control the change in sound from the moment a note is pressed on the keyboard to the moment it is released (Page 77). You can set different values for each Element.

PEG’Level) Hold Attack Decay1 Sustain￿

EL1234 +127 -128 +127 + 0

■Hold (Hold Level) Set the Hold Level.

❏Settings: -128 ~ 0 ~ +127 (-4800 cents ~ 0 ~ +4800 cents)

■Attack (Attack Level) Set the Attack Level.

❏Settings: -128 ~ 0 ~ +127 (-4800 cents ~ 0 ~ +4800 cents)

■Decay1 (Decay 1 Level) Set the Decay 1 Level.

❏Settings: -128 ~ 0 ~ +127 (-4800 cents ~ 0 ~ +4800 cents)

■Sustain (Sustain Level) Set the Sustain Level.

❏Settings: -128 ~ 0 ~ +127 (-4800 cents ~ 0 ~ +4800 cents)

PEG Release

You can set Release Time and Release Level parameters for the Pitch Envelope Generator (PEG). Combined with the PEG Time and PEG Level settings, these can be used control the change in sound from the moment a note is released. You can set different values for each Element.

 

 

 

 

 

 

PEG’Release)

Time

Level

￿

 

EL1234

127

+127

 

 

 

 

 

 

76