RCV Sw3 (Receive Switch 3)

When set to “on,” each Voice in each Part will receive volume, pan, sustain pedal, foot switch and Control Change messages.

Parts 1 to 16

 

 

 

 

 

 

 

 

RCV’Sw3)

Vol

Pan

Sus

FS

￿

 

Part01

on

off

on

off

 

 

 

 

 

 

 

 

Plug-in Part

Multi Plug-in Part

 

 

 

 

 

 

 

RCV’Sw3)

Vol

Pan

Sus

￿

 

PartPL

on

off

on

 

 

 

 

 

 

 

Drum Voice Part

 

 

 

 

 

 

 

RCV’Sw3)

Vol

Pan

FS

￿

 

Part10

on

off

off

 

 

 

 

 

 

 

❏Settings:

Vol (Volume): off, on

Pan: off, on

Sus (Sustain): off, on

FS (Foot Switch): off, on

RCV Sw4 (Receive Switch 4)

When set to “on,” each Voice in each Part will receive Program Change and Control Change messages when you change Performance Bank/Program.

 

 

 

 

 

 

 

RCV’Sw4)

BankSel

PgmChng

CtrChng

￿

 

Part01

off

on

off

 

 

 

 

 

 

 

❏Settings:

BankSel (Bank Select): off, on

PgmChng (Program Change): off, on

CtrChng (Control Change): off, on

Part Controller

You can set various Controller parameters for the Multi Plug-in Parts 17 to 32. The following six screens for the Multi Plug-in Part parameters are available.

CTL MW Control (MW Control Depth) (Multi Plug-in Parts only)

CTL MW Modulation (MW Modulation Depth) (Multi Plug-in Parts only)

CTL AT Control (AT Control Depth) (Multi Plug-in Parts only)

CTL AT Modulation (AT Modulation Depth) (Multi Plug-in Parts only)

CTL AC Control (AC Control Depth) (Multi Plug-in Parts only)

CTL AC Modulation (AC Modulation Depth) (Multi Plug-in Parts only)

CTL MW Control (MW Control Depth) (Multi Plug-in Parts only)

The Modulation Wheel can be used to control Filter and Amp parameters for each Multi Plug-in Part (17 to 32).

 

 

 

 

 

 

 

CTL’MW

Control)

Filter

Amp

￿

 

Part17

 

+63

+63

 

 

 

 

 

 

 

■Filter

Set the amount by which the Modulation Wheel can be used to adjust the filter’s Cutoff frequency.

❏Settings: -64 ~ +63

■Amp

Set the amount by which the Modulation Wheel can be used to adjust the output level (amplitude).

❏Settings: -64 ~ +63

CTL MW Modulation (MW Modulation Depth) (Multi Plug-in Parts only)

The Modulation Wheel can be used to control the amount of pitch/filter/amplitude modulation applied to each Multi Plug-in Part (17 to 32).

 

 

 

 

 

 

 

CTL’MW

Modulation) PMod

FMod

AMod

￿

 

Part17

127

127

127

 

 

 

 

 

 

 

■PMod (Pitch Modulation Depth)

Set the amount by which the pitch modulation changes when the Modulation Wheel is used.

❏ Settings: 0 ~ 127

Performance Mode

119