
■ Speed | ■ AMod (Amplitude Modulation Depth) |
Set the speed of the LFO waveform. A larger setting | Set the amount (depth) by which the LFO waveform |
means a faster speed. | varies (modulates) the amplitude of the sound. |
❏ Settings: 0 ~ 63 | A larger setting means a larger modulation depth. |
| |
Speed = Fast | ❏ Settings: 0 ~ 127 |
|
Mode Voice
Time
Speed = Slow
Time
■KeySync
Switch Key Sync on or off. When switched on, the LFO waveform is reset every time a note is played.
❏ Settings: off, on
Sync off | Sync on | ||||
|
|
|
|
|
|
| Time |
| Time | ||
|
|
|
|
|
|
Key on | Key on |
LFO Depth
Set the amount by which the LFO waveform controls changes in Pitch/Filter/Amp settings.
|
|
|
|
|
|
| LFO’Depth) | PMod | FMod | AMod | |
| EL1234 | 127 | 127 | 127 |
|
|
|
|
|
|
|
■PMod (Pitch Modulation Depth)
Set the amount (depth) by which the LFO waveform varies (modulates) the pitch of the sound. A larger setting means a larger modulation depth.
❏Settings: 0 ~ 127
■FMod (Filter Modulation Depth)
Set the amount (depth) by which the LFO waveform varies (modulates) the Filter Cutoff frequency. A larger setting means a larger modulation depth.
❏Settings: 0 ~ 127
Element EQ (Equalizer)
You can set the following two Equalizer parameters for each Element.
EQ Type
EQ Param (EQ Parameter)
EQ Type
|
|
|
|
| EQ’Type) | Type | |
| EQ L/H |
| |
|
|
|
|
■Type
Select the Equalizer Type. Various Equalizers are available which can be used not just for altering existing sounds, but also in generating completely new sounds.
Some items in the following EQ Param (EQ Parameter) screen may or may not be available, depending on the selected Equalizer Type
❏Settings: EQ L/H (EQ Low/High), P.EQ (Parametric EQ), Boost6 (Boost 6dB), Boost12 (Boost 12dB), Boost18 (Boost 18dB), thru
The parameters for the Filter Type are as follows.
•EQ L/H (EQ Low/High)
This is a Shelving Equalizer which combines a High Frequency and Low Frequency Band to adjust the signal Level. If you select this Filter, the EQ Parameter screen will be available with the following parameters.
|
|
|
|
|
|
| EQ’Param)LoFreq | LoGain | HiFreq | HiGain | |
| +32 | 6.25kHz | +32 |
| |
|
|
|
|
|
|
+
0 Frequency
-
Low Freq | High Freq |
86