Yamaha S30 Entering Data

[ENTER] Key		Moving the Cursor
Normally, the [ENTER] key is used to apply		By using a knob ([A], [B], [C], [1] or [2]) while
Normally, the [ENTER] key is used to apply		holding down the [SHIFT] key, you can move the
parameter settings. In some cases, however, the		holding down the [SHIFT] key, you can move the
parameter settings. In some cases, however, the		cursor (³) to the respective parameter on the
following screen appears prompting you to press		cursor (³) to the respective parameter on the
following screen appears prompting you to press		screen without affecting its value.
the [ENTER] key.		screen without affecting its value.
the [ENTER] key.
EF	MASTER		OSC’Out)	Level		Delay	InsEF
BYPASS	KEYBOARD		EL1234	96		³ 0	ins2
		SHIFT PAGE	A	B	C	1	2	DATA
EXIT	ENTER
			PART/ELEMENT
DEC/NO	INC/YES

Basics Section


EFF’EF1) Ctgry		Type	[ENTER]
C 1234	MOD	Tremolo	to Edit

The [ENTER] key has other functions, as described in other sections in this manual.

Entering Data

[INC/YES] and [DEC/NO] Keys

You can use the [INC/YES] key to increment a parameter setting by one step, or the [DEC/NO] key to decrement it. If you hold down either key, the value is continuously changed.

DEC/NO INC/YES

You can use the knobs to directly alter their respective parameters on the screen. Alternatively, you can also move the cursor (³) to

aparameter and set its value using the [INC/YES] and [DEC/NO] keys, or the [DATA] knob.

Knobs [A], [B], [C], [1] and [2]

Each parameter in a screen is normally associated with a knob ([A], [B], [C], [1] or [2]) below the display. When you use one of these knobs, the cursor (³) moves to its respective parameter and you can change its value. For instance, you can use Knob [B] at the following screen to change the Level setting. Turn the knob clockwise to increase the value and anti-clockwise to decrease it.

OSC’Out)	Level	Delay	InsEF
EL1234	³ 96	0	ins2

You can also use these keys to answer “YES” or “NO” when a confirmation message is displayed.

Moving the Cursor

By pressing the [INC/YES] or [DEC/NO] key while holding down the [SHIFT] key, you can move the cursor between parameters on the screen without affecting their values.

		OSC’Out)	Level		Delay	InsEF
		EL1234	³ 96		0	ins2
SHIFT	PAGE	A	B	C	1	2	DATA

PART/ELEMENT

DEC/NO INC/YES

SHIFT

PAGE

DATA

PART/ELEMENT