Card Mode Operations
1Insert the Memory Card into the CARD slot.
2Press the [CARD] key to enter Card Mode.
3Use the [PAGE] knob to switch to the screen for the operation you wish to perform.
|
| Save) | Type | File | Cursor |
| ||
|
| Card | all | ***[NEWFILE .S2A] |
|
|
| |
SHIFT | PAGE | A | B | C | 1 | 2 |
| DATA |
PART/ELEMENT
In the first “Status” screen, you don’t need any further operation described in step 2 and after.
4Use Knobs [B], [C], [1] and [2] to set each parameter. Alternatively, you can use the [DATA] knob and the [DEC/NO] and [INC/YES] keys.
To save, load, rename or delete a file, use Knob [B] to select the File Type and Knob [C] to select the File Number.
File Directories
Directories are denoted by “DIR” next to the directory name. To open a directory, use Knob [C] to move the cursor to it and press the [ENTER] key. All the files in the directory are displayed. If you select File Number 000, “up dir” will be displayed. By pressing the [ENTER] key, you will be returned to the parent directory (i.e., moved up one directory level).
When saving or renameing, the directory for the currently selected file is displayed if you press the [SHIFT] key.
5When you press the [ENTER] key, you will see a confirmation message.
|
|
|
|
|
|
| Load) | Type | |||
| << | Are you | sure? [YES]/[NO] | >> |
|
|
|
|
|
|
|
6Press the [INC/YES] key to execute the operation. The message “Completed.” will be displayed after it has executed, and you will be returned to the previous screen.
The operation will be canceled if you press the [DEC/NO] key during execution.
If the operation takes some time to execute, you will see the message “Executing...” If you switch the power off in this state, the data may be damaged.
The steps in the procedure may vary slightly, depending on the operation being performed. Refer to the explanation of each operation for details.
Status
You can view the amount of free and used on the Memory Card. There are no settings.
|
|
|
|
|
| Status) | Used | Free | |
| Card | 2.9MB(70%) | 1.1MB |
|
|
|
|
|
|
■Used
Shows the amount of Memory Card memory used. The amount is shown as a percentage in parentheses.
■Free
Shows the amount of free memory on the Memory Card.
Save
You can save files to Memory Card as follows.
|
|
|
|
|
|
|
|
|
|
|
|
| Save) | Type |
|
| File:/VOICEDIR/SUBDIR | ||||||
| Card | all |
|
| 001[NEWFILE .S2A] |
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| Data to be saved | File number of | New file name | ||||||||
| (File Type) | file to be saved |
|
|
|
| |||||
■Type (File Type)
❏Settings: all (all data),
Details about each File Type are given on Page 136.
The Memory Card must be formatted before you can save data to it (Page 140).
1Use Knob [B] to select the File Type to which the data will be saved.
2To overwrite an existing file, use Knob [C] to select the File Number.
To save a file with a new name, use Knob [2] to move the cursor. Then use Knob [1] or the [DATA] knob or [DEC/NO] and [INC/YES] keys to enter the new file name (see next Page).
If you press the [SHIFT] key, the directory for the currently selected file is displayed. Further details are given in the section “Card Mode Operations”.
3When you press the [ENTER] key, the file will be saved. If an existing file will be overwritten when saving, a confirmation message will be displayed and the following step will be necessary.
Card Mode
137