4Remove the Plug-in board cover. Plug-in board plate appears.

When installing the optional Plug-in board (from when you remove the cover to when the cover is replaced securely) all operations must be done with the AC power adaptor disconnected.

8Mount the Plug-in board onto the plate as detailed in the following steps.

8-1Insert one side of the Plug-in board (the connector side) into the hooks 1 as shown in the illustration.

Hook 1

Hooks 1

Hook 1

Appendix

5Remove the tape holding the Plug-in Board cable to the plate.

6Take out the Plug-in board from the anti-static bag. When installing the board, the side with a connector and ICs must be on top.

7Carefully plug the cable connector into the Plug-in board connector until the two notches on the cable connector lock into the sockets on the board as shown in the illustration.

8-2Press down the other side

is securely

settled on the hooks 2.

 

Hook 2

 

Hooks 1

Hook 2

Hooks 2

H

Hook 2

9 Replace the Plug-in board cover by

the eight

flat-head screws you removed in the step

 

ve.

Use a coin or a Phillips screwdriver to secure

er.

142