No effects are applied.

•Has the [EF BYPASS] key been set to OFF? (Page 51)

•Has the Insertion Effect Element Switch parameter in the EFF screen of Voice Edit been set to ON? Also in this Mode, has the effect type been set to something other than “thru” or “off”? (Page 73)

•For Performances, have the Insertion Effect Parts been specified? (Page 112)

•For Reverb and Chorus, have the effect types in the Common Edit screens been set to ON? (Pages 74, 113)

The Element switches do not work for the Control Set

• Have Element-specific parameters been selected as Dest (Destination)? (Page 70)

Cannot find the Drum Voice.

• Drum Voices are selected differently to Normal Voices (Page 61).

Cannot enter small values.

• Have you only tried entering values using Assignable Knobs [A] to [C] or Knob [1]/[2]? (Page 19)

Cannot move the cursor without the settings being affected.

•Hold down the [SHIFT] key while using Knobs [A] to [C], Knob [1]/[2], and the [DATA] knob or the [INC/YES] and [DEC/NO] keys (Page 19).

Cannot receive bulk data.

•When using the S80/S30 Voice Editor, have you set a sufficient Dump Interval? The Dump Interval in the Voice Editor Setup dialog must be set to 10ms or greater.

Macintosh users: Card Filer for Macintosh does not work correctly.

•Are you using MIDI Time Piece?

Card Filer is not compatible with MIDI Time Piece. You need to disable the use of MIDI Time Piece on the Macintosh.

Plug-in Voices cannot be read into PLG Memory.

•The S30 can read CS6x/CS6R/S80 Plug-in Voice data. The Plug-in Voices for the PLG150-AN/DX/PF/VL Plug-in Boards are in MIDI File format. Use Card Filer to send voice data to Memory Card, then start playback on the sequencer to read the data into PLG Memory. Of the two types of file (PLG1 and PLG2), play back the PLG2 type.

Appendix

147