Zoom MRS-1266 Using the send/return effects, WET, REC SRC, ●WET, ●DRY, [REVERB] key or [CHORUS/DELAY] key, About the send/return effect patches

Reference [Effects]

REC SRC

WET●WET

The input signal that has passed through the insert effect will be recorded on the track (default setting).

●DRY

Only the unprocessed input signal will be recorded on the track. Even in this case, however, the insert effect will be applied to the monitor signal.

5. Turn the dial to change the setting to “DRY”.

6. When you have finished adjusting settings, press the [EXIT] key several times.

The unit returns to the main screen.

NOTE

The “UTILITY REC SRC” setting is stored independently for each project. Before you begin recording other parts, change the setting back to “WET”.

Using the send/return effects

This section explains how to select and edit patches for the

send/return effects (chorus/delay, reverb).

About the send/return effect patches

The “reverb” and “chorus/delay” send/return effects are separate and independent.

Reverb and chorus/delay each have an “effect type” that determines the type of effect, and various parameters that let you adjust the character of the effect. Settings for the effect type and parameters, together with a name, are collectively called send/return effect “patches”.

A newly created project contains 20 different reverb patches and 20 different chorus/delay patches. You can instantly switch reverb or chorus/delay settings simply by choosing the effect for which you want to select a patch (reverb or chorus/delay), and then selecting a patch. The patch number are assigned as follows.

Effect	Patch number
REVERB	00 – 19
CHORUS/DELAY	00 – 19

Selecting a send/return effect patch

This section explains how to select a reverb or chorus/delay

patch.

1. Press the [EFFECT] key, and then press the[REVERB] key or [CHORUS/DELAY] key.

Press the [REVERB] key if you want to select a reverb patch, or the [CHORUS/DELAY] key if you want to select a chorus/delay patch.

The currently selected patch will be displayed. The following display shows an example of what you see when the [REVERB] key is pressed.

ZOOM MRS-1266

125