Zoom MRS-1266 Switching the level meter display type, Assigning a signal to the SUB OUT jack, POST, UTILITY, TR EDIT, UTILITY, TR EDIT, SUB OUT, LVL MET, ●PRE, DRUM, ●POST

Reference [Other Functions]

Switching the level meter display type

The level meter below the display can indicate the level of the signal after passing through the level controls/faders (post-fader) or the signal before passing through the level controls/faders (pre-fader). You can change the setting as follows.

1. From the main screen, press the [UTILITY/TRACK EDIT] key in the display section.

The utility menu appears.

UTILITY

TR EDIT

2. Use the cursor left/right keys to bring up the indication “UTILITY SYSTEM” on the display, and press the [ENTER] key.

The system utility menu for making various system settings

appears.

3. Use the cursor left/right keys to bring up the

indication “UTILITY LVL MET” on the display, and

press the [ENTER] key.

The current level meter setting will be displayed.

Assigning a signal to the SUB OUT jack

With the default settings of the MRS-1266, the STEREO SUB OUT jack on the front panel carries the signal after the [MASTER] fader. (Therefore it can be used as an extra headphone jack.)

If required, you can assign a signal to the jack, so that it carries only the signal from a specific input, track, or the drum or bass channel. This is useful for example to extract only the drum sound for further processing with an external effect device. To assign a signal to this jack, proceed as follows.

1. From the main screen, press the [UTILITY/TRACK EDIT] key in the display section.

The utility menu appears.

UTILITY

TR EDIT

2. Use the cursor left/right keys to bring up the indication “UTILITY SUB OUT” on the display, and press the [ENTER] key.

The signal currently assigned to the STEREO SUB OUT jack will be displayed.

	SUB OUT
LVL MET
POST	MASTER

The setting has the following meaning.

●POST

The meters show the level of the signal after passing through the level controls/faders (default setting).

●PRE

The meters show the level of the signal before passing through the level controls/faders.

4. Turn the dial to change the setting.

5. To return to the main screen, press the [EXIT] key several times.

The following selections are available.

●MASTER

Signal after [MASTER] faders

●DRUM

Drum signal after [DRUM] fader

●BASS

Bass signal after [BASS] fader

●TR1 - TR8, TR9/10

Signal of respective track, after fader 1 - 8, 9/10.

●INPUT

Signal after input [REC LEVEL] control

ZOOM MRS-1266

156