Reference [Mixer]

5. Press the [EXIT] key to return to the main screen,and press the [EFFECT] key.

The currently selected effect patch appears on the display.

6. Press one of the [ALGORITHM] keys in the effect section to select the desired algorithm, and turn the dial to select the patch to be used.

When you have selected the patch, press the [EXIT] key to

return to the main screen.

INSERT

Standard 0

Patch number

7. While playing your instrument, adjust the recording

level by turning the [REC LEVEL] control.

The [REC LEVEL] control adjusts the signal level before it is sent to the recording track (i.e., after it has passed through the insert effect). The [CLIP] indicator will light if the signal clips. Set the recording level as high as possible, but avoid settings that cause the [CLIP] indicator to light.

HINT

• The level of the signal sent to the recording track will

change according to the settings of the insert effect

parameters. If you switch insert effect patches or edit the

parameters, you should once again check whether the

recording level is appropriate.

• The precise setting of the [REC LEVEL] control parameter

can be checked by pressing the track parameter section

●Two mono tracks or stereo track selected as recording track

Recorder

Track

Track

Recorder

Track

Track

●One mono track selected as recording track

Recorder

Track

Recorder

Track

●No track selected as recording track

MASTER (11/12)

OUTPUT

[PAN] key → [ON/OFF] key operated in step 2 → cursor

Track

L

down key.

8. Press the status key for the recording destination track (1 - 8, 9/10) so that the key is lit in red. The track is now ready for recording.

The input signal from the input mixer will be sent to the

mixer

R

[MASTER]

fader

MASTER (11/12)

OUTPUT

recording track. You can select record mode for up to two

Track

L

mono tracks (1 - 8) or one stereo track (9/10). When selecting two mono tracks, the track pairs will be 1/2, 3/4, 5/ 6, or 7/8.

The signal flow from the input mixer to the track will change as follows, depending on the number of inputs and recording tracks.

ZOOM MRS-1266

mixer

R

[MASTER]

fader

NOTE

The diagrams above show the signal flow when the insert effect has not been inserted into the input mixer. For details on the signal flow when the insert effect is inserted, refer to page 120.

77