Reference [Projects]

Backup and restore

This section explains how you can use the CD-R/RW drive in the MRS-1266 to back up a project to a CD-R/RW disc and how to restore a project from a disc backup.

NOTE

On the MRS-1266 without preinstalled CD-R/RW drive,

performing the backup operation is not possible.

Saving a single project to CD-R/RW disc

You can select any project and save it on a CD-R/RW disc

for backup.

HINT

If the size of the project is larger than the capacity of the CD- R/RW disc, you can create a backup spanning multiple vol- umes.

1. Insert a CD-R or CD-RW disc into the CD-R/RWdrive.

To back up a project, use a blank CD-R/RW disc or a CD-

RW disc that has been completely erased.

2. From the main screen, press the [BACK UP] key in the control section.

The backup menu appears.

BACKUPSAVE

3. Use the cursor left/right keys to bring up the indication “BACKUP SAVE” on the display, and press the [ENTER] key.

The display changes to a screen for selecting the project to

be backed up.

SAVE

PRJ001

4. Turn the dial to select the project, and press the

[ENTER] key.

This selects the project that will be backed up. The display now shows the space required for the backup in MB (megabytes).

PRJ SIZE 000108MB

5. Press the [ENTER] key.

The name of the directory to be used for backup appears. A “directory” (also called “folder”) is a hierarchical unit that will be created on the backup media when the backup is executed. All data for one project are stored in the same directory.

When the backup is executed, a new directory is created on the CD-R/RW disc with the name “PROJxxx” (where xxx is the project number). This name can be edited if desired.

DirName PROJ001

6. If you want to edit the backup destination directory name, use the cursor left/right keys to move the flashing position and turn the dial to select a character.

The following characters can be used.

Numerals: 0 - 9Letters: A - ZSymbols: _ (underscore)

7. Press the [ENTER] key.

The indication “SAVE SURE?” appears on the display.

HINT

If you press the [EXIT] key at any point during steps 4 - 7, you

can return to the previous step.

8. To execute the backup, press the [ENTER] key. Tocancel, press the [EXIT] key instead.

When backup starts, the disc number and the indication

“BURNING” appear on the display.

ZOOM MRS-1266

142