Zoom MRS-1266 Appendix, MRS-1266specifications, ●Mixer, ●Effects, ● Recorder, ● Rhythm section

Appendix

Appendix

MRS-1266 specifications

● Recorder

Number of physical tracks	12
Number of virtual tracks	120 (10 V-takes per track)
Drum track	1 (stereo)
Bass track	1 (mono)
Number of simultaneous recording tracks
6
Recording data format
16-bit linear (non-compressed)
Maximum recording time
Approx. 3 hours/gigabyte (referred to mono tracks)
Marker function	100 mark points per project
Location indication
Hour/Min/Sec/mSec/Meas/Beat/Tick display
Track edit functions
Copy, move, paste, erase, exchange, trim, fade-in/out,
reverse, time stretch/compression
Punch-in/out function	Manual, auto
Other functions

Bounce, scrub/preview, A-B repeat, capture/swap, phrase loop

●Mixer

Number of simultaneous playback tracks

13 (10 audio tracks + stereo drum track + mono bass track)

Faders

12 (1-8 mono, 9/10 stereo, drum, bass, stereo master)

Level meter indication

Post fader/pre fader (selectable), fader value monitor function

Track parameters

Equalizer, effect send, panning (balance for stereo-linked tracks)

Equalizer

HIGH (f: 500 Hz - 18 kHz, gain: ±12 dB)

LOW (f: 40 Hz - 1.6 kHz, gain: ±12 dB)

Effect sendChorus/delay send, reverb send

Stereo linking

Tracks 1/2, 3/4, 5/6, 7/8, selectable; tracks 9/10 (fixed)

Scene function

100 scenes per project (assigning to marks possible)

●Effects

Algorithms

5 types (dual, guitar/bass, mic, line, mastering)

Modeling principle

VAMS (Variable Architecture Modeling System)

Number of patches

280 (dual 50 + guitar/bass 100 + mic 50 + line 50 + mastering 30)

Number of effect modules

4 (compressor, preamp/drive, equalizer, modulation/ delay)

Number of send/return modules

2 (chorus/delay, reverb)

Number of send/return patches

40 (chorus/delay 20 + reverb 20)

Tuner principleChromatic auto tuner

Tuner calibration

435 - 445 Hz, adjustable in 1-Hz steps

● Rhythm section

Number of voices	30 (drum + bass)
Sound source principle	16-bit linear PCM
Drum kits	127

Drum sound sources

36 per drum kit (12 pads x 3 banks)

Bass sound sources	26	(5 octaves each)
Number of pads	12	(with velocity sensing)
Resolution	48 PPQN
Beat range	1/4 - 8/4

Number of factory preset patterns over 400 (rewritable)

Maximum number of patterns

511 per song (rewritable)

Maximum number of measures

999 (per rhythm song), 99 (per rhythm pattern)

Number of notes

approx. 20,000 (per rhythm song)

Tempo range	40.0 - 250.0
Hard disk	3.5 inch E-IDE type
Maximum number of projects
1000
A/D converter	24-bit, 64-times oversampling
D/A converter	24-bit, 8-times oversampling
Sampling frequency	44.1 kHz
Signal processing	24-bit
Frequency response
20 Hz - 20 kHz ±1 dB (10-kilohm load)
S/N ratio	93 dB (IHF-A)
Dynamic range	97 dB (IHF-A)
THD + noise
0.02% (400 Hz, 10-kilohm load)
Display
96 x 63 mm, custom LCD (with backlight)
Guitar/bass (Hi-Z) input
2 x standard mono phone jack, input impedance 500
kilohms
Unbalanced inputs
6 x standard mono phone jack, input impedance 50
kilohms or more, unbalanced
Balanced inputs
2 x XLR-3-31 type, input impedance 1 kilohm balanced,
pin 2 hot
Phantom power supply
48 V (with on/off switch)
Input level
-50 dBm to +4 dBm (continuously variable)
Master output
RCA type phono jacks (L/R)
Output impedance	1 kilohm
Rated output level	-10 dBm
Headphone output

Standard stereo phone jack, 50 mW (into 32-ohm load)

Sub output

Standard stereo phone jack, 50 mW(into 32-ohm load)

Digital output

S/P DIF, optical (20-bit)

MIDI connectors	IN, OUT
Control input	FP02 connector, FS01 connector
Optional board slot	1
Dimensions	480 (W) x 310 (D) x 115 (H) mm
Weight
6.8 kg (with drive)	/ 5.8kg(without drive)
Power supply	12 V DC, 2.5 A
(from supplied AC adapter AD-0010)
Power consumption	30 W (12 V, 2A) typ.
Supplied accessories
Universal AC adapter (AD-0010), AC cable
Optional accessories	FS01 (foot switch)
Option board	FP02 (expression pedal)
	UIB-01 (USB interface board)

0 dB = 0.775 Vrms

Design and specifications are subject to change without notice.

ZOOM MRS-1266

160