Zoom MRS-1266 Track capture and swap, ◆ Swap, ◆ Capture, [ENTER] key, Capturing a track, Exchanging V-takes, Then press the [ENTER] key, SWAP] key in the control section

Reference [Track Editing]

Exchanging V-takes

You can exchange the audio data of two specified V-takes.

Exchange

1. Refer to steps 1 - 5 of “Basic V-take editing steps” to select the exchange source track/V-take and to bring up the indication “EXCHG” on the display.

Then press the [ENTER] key.

A screen for selecting the exchange destination appears on

the display.

2. Use the cursor left/right keys and the dial to select

the exchange destination V-take, and press the

[ENTER] key.

The indication “EXCHG SURE?” appears on the display.

Track capture and swap

You can capture the audio data of any track and temporarily store them on the hard disk. Later you can swap the captured data with the current data of the track. This lets you for example save the state of a track before an editing operation. If the result of the operation is not as desired, you can then easily restore the track to its previous state.

◆ Capture Recorded data

Recorder

Track 1

Track 2

Track 3

Captured data

of track 1

Capture operation for track 1

◆ Swap Recorded data

Recorder

Track 1

Track 2

Track 3

3. To execute the exchange operation, press the [ENTER] key once more. To cancel the operation, press the [EXIT] key.

After the exchange operation is completed, the unit returns

to the V-take editing menu.

Captured data of track 1

Recorder

Track 1

Track 2

Track 3

Captured data of track 1

Swap operation for track 1

NOTE

Captured track data will be erased from the hard disk when

the currently selected project is saved.

Capturing a track

You can capture the audio data of any specified track.

1. From the main screen, press the [CAPTURE/SWAP] key in the control section.

A screen for selecting a track appears on the display.

ZOOM MRS-1266

63