Zoom MRS-1266 manual 167

Appendix

EQ MODULE

TYPE	PARAMETER 1		PARAMETER 2	PARAMETER 3	PARAMETER 4
3BandEQ	HIGH		MID	LOW	LEVEL
	Three-band equalizer.
Explanation of EQ MODULE parameters
Parameter name	Range		Explanation of parameter
HIGH	-12 – 12	Boosts/cuts the high-frequency range.
MID	-12 – 12	Boosts/cuts the mid-frequency range.
LOW	-12 – 12	Boosts/cuts the low-frequency range.
LEVEL	1 – 8	Sets the output level of the module.

ZNR MODULE

TYPE	PARAMETER 1
ZNR	THRSHOLD
	Zoom's proprietary noise reduction that minimizes noise when you are not playing.

*For an explanation of the parameters, refer to the DUAL algorithm.

VOL PDL MODULE

TYPE	PARAMETER 1
VOL PDL	MIN VOL
	You can use an expression pedal to control the volume.

MODULATION/DELAY MODULE

TYPE	PARAMETER 1		PARAMETER 2	PARAMETER 3	PARAMETER 4
CHORUS	DEPTH		RATE	MIX	--
	Stereo chorus with clear sound and great spaciousness.
FLANGER	DEPTH		RATE	FB	--
	An effect that adds a pronounced character and modulation to the sound.
PHASER	POSITION		RATE	COLOR	--
	An effect that adds a swooshing modulation to the sound.
TREMOLO	DEPTH		RATE	CLIP	--
	An effect that cyclically varies the volume.
PDL-WAH	POSITION		FREQ	LEVEL	RTM
	An effect that lets you use an expression pedal to control wah manually.
AutoWah	FLT TYPE		POSITION	RESO	SENS
	An effect in which wah is applied according to your playing dynamics.
PITCH	SHIFT		TONE	BALANCE	--
	An effect that modifies the pitch of the original sound.
RingMod	POSITION		RATE	BALANCE	--
	An effect that produces a metallic resonance.
EXCITER	FREQ		DEPTH	LowBoost	--
	An effect that gives the sound more focus and spatial definition.
AIR	SIZE		TONE	MIX	--
	Simulates the effect of air on the room resonance, giving the sound spatial depth.
WIDE	TIME		WET LVL	DRY LVL	--
	An effect that produces the sound of a stereo recording made with two mics.
DELAY	TIME		FB	MIX	--
	A delay effect with a maximum of 500 mSec.
Explanation of MODULATION/DELAY MODULE parameters
Parameter name	Range		Explanation of parameter
DEPTH	0 – 10	Adjusts the depth of the effect.
RATE	1 – 30	Adjusts the speed of the effect.
MIX	0 – 30	Adjusts the mix amount of the effect.
FB	TYPE = FLANGER : -10 – 10	Adjusts the amount of feedback.
	TYPE = DELAY : 0 – 10
POSITION	AF / bF	Exchanges the effect locations of the DRIVE module and MOD module.
COLOR	1 – 4	Changes the type of the phase tone.
CLIP	0 – 10	Emphasizes the effect.
FREQ	TYPE = PDL-WAH : 1 – 50	Specifies the center frequency of the wah.
	TYPE = EXCITER : 1 – 5	Specifies the frequency.
LEVEL	1 – 8	Sets the output level of the module.
RTM	OFF / On	Specifies whether the expression pedal will be used as a wah pedal.
FLT TYPE	bPF / LPF	Specifies the type of filter.
RESO	1 – 10	Adds character to the sound.
SENS	-10 – 10	Adjusts the sensitivity with which the effect is applied.
SHIFT	-12.0 – 24.0	Sets the amount of shift produced by the pitch shifter.
TONE	0 – 10	Adjust the tone.
BALANCE	0 – 30	Adjusts the balance between the direct sound and effect sound.
LowBoost	0 – 10	Emphasizes the low-frequency range.
SIZE	1 – 10	Specifies the spatial width.
TIME	TYPE = WIDE : 1 – 64	Sets the delay time.
	TYPE = DELAY : 1 – 50
WET LVL	0 – 30	Adjusts the mix amount of the effect sound.
DRY LVL	0 – 30	Adjusts the mix amount of the direct sound.

ZOOM MRS-1266

167