Zoom MRS-1266 MRS-Drv, UTILITY, REC SRC, PAT NAME, 4. Press the [ENTER] key, 2. Press the [TOTAL] key, and use the cursor up

Reference [Effects]

2. Press the [TOTAL] key, and use the cursor up/

down keys to bring up the indication “PAT NAME”.

The name of the selected patch can now be edited. The

character currently selected for editing flashes.

PAT NAME

MRS-Drv

3. Use the cursor left/right keys to move the flashing position to the character you want to change, and turn the dial to select a character.

For information on available characters, refer to page 39.

4. Repeat step 3 as necessary to complete the new name.5. To confirm the new name, press the [STORE] key in the control section twice.

The new name is stored, and the unit returns to the patch

selection screen.

NOTE

Keep in mind that the name will revert to the previous name if you switch to another patch without storing the edited patch name.

Applying the insert effect only to the monitor signal

Normally when the insert effect is placed into the input mixer, the signal processed by the effect will be recorded on the track. If necessary, however, you can apply the insert effect only to the monitor signal, and record the unprocessed input signal on the track. For example when recording the unprocessed sound of a vocal performance, the vocalist may be more comfortable singing if an insert effect suitable for mic recording is applied to the monitor signal.

INPUT

Insert effect

Recorder

1. Set the insert effect position to the input mixer.

2. In the main screen, press the [UTILITY/TRACK EDIT] key in the display section.

The utility menu appears.

3. Use the cursor left/right keys to call up the indication “UTILITY REC SRC”.

UTILITY

REC SRC

4. Press the [ENTER] key.

The display indication changes as follows. You can now

select one of the following two signal types to be recorded

on the track.

ZOOM MRS-1266

124