Zoom MRS-1266 INSERT, Syn-Lead, ■When inserted into the input mixer, 3. Turn the dial to select the patch, ●Recording on mono tracks (tracks 1 - 8)

Reference [Effects]

INSERT

Syn-Lead 0

3. Turn the dial to select the patch.

The selected patch becomes active immediately.

HINT

The indication “EMPTY” appears instead of the patch name

if the patch is empty.

4. If you want to temporarily turn the insert effect off,

press the [BYPASS] key in the effect section.

The [BYPASS] key lights up, and the insert effect is

bypassed. Pressing the [BYPASS] key once more enables

the effect again.

5. To return to the main screen, press the [EXIT] key.

The flow of the signal that passes through the insert effect will change as shown below, depending on the insert location, the number of input signal channels (1 or 2 channels), and the input/output type of the insert effect. (“M

→S” indicates mono input/stereo output, “S → S” indicates stereo input/output, “Dual” indicates mono input/output x 2.)

HINT

When no recording track is selected, the output signal of the insert effect is sent to a point directly before the [MASTER] fader and mixed with the track mixer signal.

■When inserted into the input mixer●Recording on mono tracks (tracks 1 - 8)

INPUT	EFFECT	Recorder
		Track
	( M → S )
	EFFECT	Track
	( S → S )
	EFFECT	Track
	( DUAL )
	EFFECT	Track
	( M → S )

EFFECT	Track
( S → S )

EFFECT	Track
( DUAL )

●Recording on stereo tracks (9/10) or two mono tracks (1/2, 3/4, 5/6, 7/8)

	Recorder
INPUT	Track
EFFECT
( M → S )	Track
EFFECT	Track
( S → S )	Track
EFFECT	Track
( DUAL )	Track
EFFECT	Track
( M → S )	Track
EFFECT	Track
( S → S )	Track
EFFECT	Track
( DUAL )	Track

ZOOM MRS-1266

120