Reference [Phrase Looping]

can edit and reuse the equation later.

•For a phrase loop that has already been written to a track/ V-take, it is not possible to write it again in part or to add another phrase loop. In such a case, specify the entire phrase again as an equation and write the entire phrase again.

CREATE

TR10- 1

When track 10 is selected, turning the dial further to the right brings up the following screen.

Writing a phrase loop to a track

This section explains how to create a phrase loop and write

it as audio data to a specified track/V-take.

1. From the main screen, press the [UTILITY/TRACK EDIT] key in the display section.

The utility menu appears on the display.

2. Use the cursor left/right keys to bring up the indication “UTILITY PHRASE” on the display, and press the [ENTER] key.

The display changes as follows.

PHRASE

PH000-00

3. Press the [UTILITY/TRACK EDIT] key in the display section.

The phrase utility menu appears on the display.

PHRASE

IMPORT

4. Use the cursor left/right keys to bring up the indication “PHRASE CREATE” on the display, and press the [ENTER] key.

The display changes as follows. This screen lets you select a

track/V-take for writing the phrase loop.

CREATE

TR 1- 1

5. Use the cursor left/right keys and the dial to select the track/V-take to which to write the phrase that will be created.

ZOOM MRS-1266

CREATE

TR1/2

When this screen is shown, turning the dial to the right selects tracks in odd-numbered/even-numbered pairs (1/2, 3/ 4, 5/6, 7/8, 9/10) or the master track. In this case, the currently selected V-take for the two tracks or the master track becomes the writing target.

NOTE

•If the phrase is monaural and the write target track is stereo, the same data will be written to both tracks.

•If the phrase is stereo and the write target track is mono, the left and right channels of the phrase will be mixed when the data are written to the track.

•When a V-take which already contains audio data is select- ed, the existing data will be completely erased and over- written by the new audio data.

6. When you have selected a track/V-take, press the

[ENTER] key.

A screen for selecting the phrase loop number appears.

CREATE

LOOP017. Turn the dial to select the desired phrase loopnumber, and press the [ENTER] key.

Phrase loops can be created from 1 - 10. The name LOOP01 - LOOP10 is assigned to the respective phrase.

When you press the [ENTER] key, the display changes to the loop input screen.

8. Use the keys and pads of the rhythm section toenter the equation for creating the loop.

For information on entry procedures, refer to page 71.

73