Zoom MRS-1266 ●IN, ●DRUM, ●BASS, ●MASTER, ●TR1 - TR8, the [EXIT] key, key in the effect section, ●TR1/2, TR3/4, TR5/6, TR7/8, TR9/10

Reference [Effects]

numbers for each type.

Algorithm	Patch number
DUAL	00 – 49
GUITAR/BASS	00 – 99
MIC	00 – 49
LINE	00 – 49
MASTERING	00 – 29

Changing the insert location of the insert effect

When the project is in its initial state, the insert effect is sent into the input mixer. However, you may change the insert location as necessary. The procedure is as follows.

1. From the main screen, press the [INPUT SOURCE]

key in the effect section.

The currently selected insert location appears on the display.

IN SRC

IN

Insert position of insert effect

The following positions are available.

●IN

Input mixer (default setting)

●DRUM

Drum sound output

●BASS

Bass sound output

●TR1 - TR8

Track 1 - 8 output

●TR1/2, TR3/4, TR5/6, TR7/8, TR9/10

Track 1/2, 3/4, 5/6, 7/8, or 9/10 output

●MASTER

Immediately before [MASTER] fader

2. Turn the dial to select the insert position.

ZOOM MRS-1266

NOTE

•While the above display is shown, you can select the insert position by pressing the [ON/OFF] keys or status keys in the input section. To select the track pairs 1/2, 3/4, 5/6, and 7/8, or to select two tracks in 6TR REC mode, press two status keys simultaneously.

•In 6TR REC mode, you can also activate two status keys which are not adjacent.

3. When the insert position has been selected, press

the [EXIT] key.

The unit returns to the main screen.

HINT

When the insert effect is placed in a position other than the

input mixer, the [INPUT SOURCE] will be lit at the main

screen.

Selecting the patch for the insert effect

This section explains how to select the patch for the insert

effect.

1. Press the [EFFECT] key in the display section.

The key lights up, and the display indicates the patch selected for the most recent effect operation (insert effect or send/return effect).

Effect type

INSERT

MRS-Drv 1

Patch name Patch number

If the most recent operation step was for the insert effect, the indication “INSERT” is shown on the first line of the display. If the most recent step was for the send/return effect, the indication “SEND REV” or “SEND CHO” is shown on the first line of the display.

2. Select the desired algorithm by pressing therespective [ALGORITHM] key in the effect section.

To select a patch for the insert effect, start by selecting the algorithm. When you press an [ALGORITHM] key, the patches comprised in that algorithm are shown on the display.

119