Reference [Creating a CD]

Loading data from an audio CD

The MRS-1266 can read audio data from an ordinary audio CD inserted in the CD-R/RW drive and record the data on any track of the internal recorder. The data can then be handled and edited in the same way as other tracks.

HINT

Data can be read only as entire audio CD tracks. Specifying a range is not possible. If you want to use only a part of a track, perform trimming of unwanted portions after loading (→ p. 57).

1.

2.

3.

Insert the disc from which to load audio data into the CD-R/RW drive.

Perform steps 2 - 5 of “Playing an audio CD” and select the desired track of the CD.

Press the REC [O] key.
READ DST

TR 1/2

4. Turn the dial to select the track for recording the data.

Only odd-numbered/even-numbered pairs of mono tracks (1/2, 3/4, 5/6, 7/8), the stereo track (9/10), or the master track (MASTER) can be selected.

5. Press the [ENTER] key.

The recording destination is selected, and the indication “READ CD SURE?” appears on the display. (When the track already contains data, the indication “OverWrt?” is shown.)

6.To carry out the read process, press the [ENTER] key once more.

Loading data from the audio CD starts. When loading is complete, the unit returns to the condition of “Playing an audio CD” step 4.

7. To return to the main screen, press the [EXIT] key

several times.

ZOOM MRS-1266

137