Zoom MRS-1266 ■LINE ALGORITHM

Appendix

Explanation of MODULATION/DELAY MODULE parameters

Parameter name	Range	Explanation of parameter
DEPTH	0 – 10	Specifies the depth of the effect.
RATE	1 – 30	Specifies the speed of the effect.
COLOR	1 – 4	Modifies the type of phase tone.
CLIP	0 – 10	Emphasizes the effect.
SHIFT	-12.0 – 24.0	Specifies the amount of pitch shift produced by the pitch shifter.
BALANCE	0 – 30	Adjusts the balance between the direct sound and effect sound.
FREQ	1 – 5	Specifies the frequency.
LowBoost	0 – 10	Emphasizes the low range.
SIZE	1 – 10	Specifies the spatial width.
FB	TYPE = FLANGER : -10 – 10	Adjusts the amount of feedback.
	TYPE = DELAY : 0 – 10
	TYPE = DELAY : 1 – 50	Sets the delay time. ( x 10 mSec )
TIME	TYPE = DOUBLE : 1 – 100	Sets the delay time. ( x 1 mSec )
	1 – 100	Sets the delay time. ( x 1 mSec )
TONE	0 – 10	Adjusts the tone.
MIX	0 – 30	Adjusts the mix amount of the effect.

■LINE ALGORITHM

COMP/LIM MODULE

TYPE	PARAMETER 1		PARAMETER 2	PARAMETER 3
	SENS		ATTACK	LEVEL
COMP
	A stereo input/output compressor.
	THRSHOLD		RELEASE	LEVEL
LIMITER
	A stereo input/output limiter.
Explanation of COMP/LIM MODULE parameters
Parameter name	Range		Explanation of parameter
SENS	0 – 15	Specifies the input sensitivity of compression.
ATTACK	0 – 15	Adjusts the speed at which compression is applied.
LEVEL	1 – 8	Specifies the output level of the module.
THRSHOLD	0 – 15	Specifies the sensitivity at which the limiter will begin to apply.
RELEASE	0 – 15	Specifies the time from when the input signal falls below the threshold until compression ends.

ISOLATOR MODULE

TYPE	PARAMETER 1		PARAMETER 2	PARAMETER 3	PARAMETER 4	PARAMETER 5
ISOLATOR	XOVER_Lo		XOVER_Hi	MIX_HIGH	MIX_MID	MIX_LOW
	An effect that divides the signal into three frequency bands, and lets you specify the mix amount.
Explanation of ISOLATOR MODULE parameters
Parameter name	Range			Explanation of parameter
XOVER_Lo	50 – 16000	Specifies the frequency at which the Lo/Mid bands will be divided.
XOVER_Hi	50 – 16000	Specifies the frequency at which the Mid/Hi bands will be divided.
MIX_HIGH	OFF, -24 – 6	Specifies the mix amount of the high range.
MIX_MID	OFF, -24 – 6	Specifies the mix amount of the mid range.
MIX_LOW	OFF, -24 – 6	Specifies the mix amount of the low range.

EQ MODULE

TYPE	PARAMETER 1	PARAMETER 2	PARAMETER 3	PARAMETER 4
3BandEQ	HIGH	MID	LOW	LEVEL
	Three-band equalizer.

*For an explanation of the parameters, refer to the GUITAR/BASS algorithm.

ZNR MODULE

TYPE PARAMETER 1

ZNR

THRSHOLD

Zoom's proprietary noise reduction that minimizes noise when you are not playing.

*For an explanation of the parameters, refer to the DUAL algorithm.

VOL PDL MODULE

TYPE PARAMETER 1

VOL PDL

MIN VOL

You can use an expression pedal to control the volume.

*For an explanation of the parameters, refer to the DUAL algorithm.

ZOOM MRS-1266

169