Zoom MRS-1266 Send Return effect

Appendix

TYPE	PARAMETER 1
VOL PDL	MIN VOL
	You can use an expression pedal to control the volume.
*For an explanation of the parameters, refer to theDUAL algorithm.

DIMENSION/RESONANCE MODULE

TYPE	PARAMETER 1	PARAMETER 2	PARAMETER 3	PARAMETER 4	PARAMETER 5	PARAMETER 6	PARAMETER 7
DIMENSN	RISE_1	RISE_2	--	--	--	--	--
	DIMENSN An effect that produces spatial width.
RESONNC	DEPTH	FreqOFST	RATE	TYPE	RESO	EFX LVL	DRY LVL
	RESONNC A resonance filter with LFO.
Explanation of DIMENSION/RESONANCE MODULE parameters
Parameter name	Range		Explanation of parameter
RISE_1	0 – 30	Specifies the degree to which the stereo component is emphasized.
RISE_2	0 – 30	Specifies the spaciousness that includes the mono component.
DEPTH	0 – 10	Specifies the depth of the effect.
FreqOFST	1 – 30	Specifies the LFO offset.
RATE	1 – 30	Specifies the speed of the effect.
TYPE	HPF /LPF /bPF	Specifies the type of filter.
RESO	1 – 30	Adds character to the effect.
EFX LVL	0 – 30	Adjusts the mix amount of the effect sound.
DRY LVL	0 – 30	Adjusts the mix amount of the direct sound.

Send Return effect

CHORUS/DELAY MODULE

TYPE	PARAMETER 1	PARAMETER 2		PARAMETER 3	PARAMETER 4	PARAMETER 5
CHORUS	LFO TYPE	DEPTH		RATE	PRE DLY	EFX LVL
	A stereo chorus that produces clear sound and a wonderfully spacious feeling.
DELAY	TIME	FB		DAMP	EFX LVL	REV_SEND
	A delay effect of up to 1000 mSec.
DOUBLE	TIME	TONE		EFX LVL	--	--
	A doubling effect of up to 100 mSec.
Explanation of CHORUS/DELAY MODULE parameters
Parameter name	Range		Explanation of parameter
LFO TYPE	Mn /St	Selects the LFO phrase; Mn (mono) or St (stereo).
DEPTH	0 – 10	Sets the depth of the effect.
RATE	1 – 30	Sets the speed of the effect.
PRE DLY	1 – 30	Sets the pre-delay time.
EFX LVL	0 – 30	Adjusts the mix amount of the effect sound.
TIME	TYPE=DELAY:1 – 1000	Sets the delay time. (TIME= setting value x 1msec)
	TYPE=DOUBLE:1 – 100
FB	0 – 10	Adjusts the amount of feedback.
DAMP	0 – 10	Sets the amount of high-frequency decay for the delay sound.
REV_SEND	0 – 30	Sets the amount of delay sound that is sent to reverb.
TONE	0 – 10	Adjusts the tone.

REVERB MODULE

TYPE	PARAMETER 1	PARAMETER 2		PARAMETER 3	PARAMETER 4	PARAMETER 5	PARAMETER 6
HALL	PRE DLY	REV TIME		EQ_HIGH	EQ_LOW	E/R MIX	EFX LVL
	A reverb effect that produces the reverberation characteristic of a concert hall.
ROOM	PRE DLY	REV TIME		EQ_HIGH	EQ_LOW	E/R MIX	EFX LVL
	A reverb effect that simulates the reverberation of a room.
Explanation of REVERB MODULE parameters
Parameter name	Range			Explanation of parameter
PRE DLY	1 – 100		Specifies the pre-delay time.
REV TIME	1 – 30		Specifies the reverb time.
EQ_HIGH	-12 – 6		Specifies the high-frequency volume of the reverb sound.
EQ_LOW	-12 – 6		Specifies the low-frequency volume of the reverb sound.
E/R MIX	0 – 30		Specifies the volume of early reflections.
EFX LVL	0 – 30		Adjusts the mix amount of the effect sound.

ZOOM MRS-1266

171