Reference [Effects]

NOTE

Some effect modules have only one effect type. For such

modules, there will be no screen for selecting the effect type.

6. Use the cursor up/down keys to select the effectparameter that you want to edit.

The following diagram shows an example of what appears on the display when you have selected the DEPTH parameter of the “FLANGER” effect.

FLANGER

DEPTH 27. Turn the dial to change the setting.

For details on the effect types that can be selected for each effect module, and on the effect parameters of each type, refer to the appendix (→ p. 164) at the end of this manual.

8. Repeat steps 4 - 7 to make the desired edits for other modules.

9. If you want to adjust the patch level (the final volume of the patch), press the [TOTAL] key, use the cursor up/down keys to bring up the indication “TOTAL PAT LVL”, and turn the dial.

The patch level can be adjusted in a range of 1 - 30.

TOTAL

 

PAT LVL

20

Patch level

10. When you have finished editing, press the [EXIT]

key.

The unit returns to the patch select screen.

NOTE

Keep in mind that if you return to the patch select screen and select another patch without first storing the patch, the edited contents will be lost. If you want to keep the results of your editing, refer to the following section.

ZOOM MRS-1266

Storing an insert effect patch

A patch that you have edited can be stored in any location of the same algorithm. You can also store an existing patch in another location to create a copy of that patch.

1. Press the [EFFECT] key in the display section, andthen press the [EDIT] key.

The currently selected patch can now be edited. Perform any

editing steps that you wish to make.

2. When editing is complete, press the [STORE] key inthe control section.

A screen for specifying the store target location appears on

the display.

Store

MRS-Drv 1

Patch number

3. Turn the dial to select the store destination patch number.4. To execute the store process, press the [STORE] key once more.

The patch will be stored, and the unit returns to the patch

select screen.

HINT

•Patches that you have stored are saved on the hard disk as part of the project.

•Patch data included in an already existing project can be loaded into the current project (→p. 128).

Editing the name of an insert effect patch

This section explains how to edit the name of the currently

selected patch.

1. Press the [EFFECT] key in the display section, and

then press the [EDIT] key.

The currently selected patch can now be edited.

123