Reference [Projects]

3. Press the [ENTER] key to execute the operation (or

change the setting) that you selected.

For details on the procedure, refer to the sections that follow.

4. To return to the main screen, press the [EXIT] key

several times.

Loading a project

You can select a project that was saved on the hard disk, and

load it.

1. Refer to steps 1 - 2 of “Basic procedure” to bring up the indication “PROJECT SELECT” on the display. Then press the [ENTER] key.

The project to load is shown on the display.

PRJ SEL

 

 

 

 

 

 

PRJ001

1

Project

 

name

Project

 

number

 

 

 

 

2. Turn the dial to select the desired project.

3. Press the [ENTER] key to load the project, or press the [EXIT] key to cancel.

When loading is completed, the unit returns to the main

screen.

HINT

•When you press the [ENTER] key, the current project will be automatically saved on the hard disk before the new project is loaded.

•When power to the MRS-1266 is turned on, the project that you were last working on will be loaded automatically.

Creating a new project

This operation creates a new project.

1. Refer to steps 1 - 2 of “Basic procedure” to bring up the indication “PROJECT NEW” on the display. Then press the [ENTER] key.

The project to create is shown on the display.

Project number

PRJNo007

PRJ007 OK?

Project name

The lowest free project number is automatically selected, and a default name of “PRJxxx” (where xxx is a project number in the range of 000 - 999) will be assigned.

2. If necessary, edit the project name.

To edit the name, use the cursor left/right keys to move the flashing position to the character you want to change, and turn the dial to select a character. The project name can also be edited later (→ p. 141).

3. Press the [ENTER] key to create the project, or

press the [EXIT] key to cancel.

When the new project has been loaded, the unit returns to the main screen.

Checking the project size/available hard disk capacity

This displays the size of the currently loaded project, the available capacity of the internal hard disk, and the remaining recording time.

1. Refer to steps 1 - 2 of “Basic procedure” to bring up the indication “PROJECT SIZE” on the display. Then press the [ENTER] key.

2. Use the cursor up/down keys to select the desired screen from one the following options.

ZOOM MRS-1266

139