Zoom MRS-1266 TR1, PAN, TR2, PAN, TR2, EQ LOW G, key), •EQ HI F, •EQ LO G, • EQ HI G, • EQ LO F, other tracks, ■Adjusting the EQ, ●[EQ LOW] key pressed

Quick Tour

TR1

PAN 0

Panning value

5. Press the status key of the track whose panningyou want to adjust (or the [DRUM]/[BASS] statuskey).

The selected status key lights up in orange. While the track parameter menu is shown, the status key (or the cursor left/ right keys) can be used to select the track or drum/bass sound to be adjusted.

TR2

PAN 0

6. Turn the dial to adjust the panning value.

The panning value can be adjusted in the range from L100 (far left) – 0 (center) –R100 (far right).

7. Repeat steps 5 - 6 to adjust the panning value ofother tracks.

HINT

For tracks 9/10 and the drum sound, the PAN parameter functions as a BALANCE parameter that adjusts the volume balance between the L/R channels.

■Adjusting the EQ

8. To adjust equalization for each track, press the [EQ

HIGH] key or [EQ LOW] key.

Press the [EQ HIGH] key to adjust the high-frequency

equalizer, or press the [EQ LOW] to adjust the low-

frequency equalizer.

TR2
EQ LOW G	0

9. Press the status key of the track whose EQ you want to adjust (or the [DRUM]/[BASS] status key).

10. Use the cursor up/down keys to select the EQ parameter that you want to adjust, and turn the dial to modify the setting.

The available parameters and their ranges are as follows.

●[EQ HIGH] key pressed• EQ HI G

Adjusts boost/cut in high frequency range: -12 - 0 - 12 (dB)

•EQ HI F

Adjusts turnover frequency for high-frequency boost/cut: 500 - 18000 (Hz)

●[EQ LOW] key pressed•EQ LO G

Adjusts boost/cut in low frequency range: -12 - 0 - 12 (dB)

• EQ LO F

Adjusts turnover frequency for low-frequency boost/cut: 40 - 1600 (Hz)

HINT

•When the EQ HI G / EQ HI F parameters are displayed in the screen, you can press the [EQ HIGH] key to switch the high-frequency EQ on/off. (The key will be out when this is turned off.)

•When the EQ LO G / EQ LO F parameters are displayed in the screen, you can press the [EQ LOW] key to switch the low-frequency EQ on/off. (The key will be out when this is turned off.)

11. Adjust equalization for other tracks and for the drum/bass sound in the same way.

12. When you have ﬁnished creating settings, press the [EXIT] key.

The unit returns to the main screen.

HINT

Parameters set here can be saved in a scene (→ p. 82).

ZOOM MRS-1266