Zoom MRS-1266 Assigning marks within a song (Marker function), PRJ 001 1266CD-R, key, mark, Setting a mark, recording level, 6. Press the [BOUNCE] key

Reference [Recorder]

6. Press the [BOUNCE] key.

7. From the main screen, repeatedly press the status key of the track to be used as recording destination, until the key is lit in red.

The selected track is ready for recording. Up to two status

keys can be selected. The other tracks function normally.

HINT

When wishing to record drum sounds in stereo, select two tracks as recording destination. If only one track is selected, the recording will be in mono.

8. Verify that the [RHYTHM] key in the rhythm section is out, and that rhythm song or rhythm pattern that you want to record is selected.

HINT

It is also possible to record drum or bass sounds generated

by playing the pads on the unit or a MIDI keyboard.

9. Set the recorder to playback and adjust therecording level.

Adjust levels while watching the L/R level meter, and make

sure that no signal clipping occurs.

10. Press the ZERO [U] key to return to the beginning

of the song, and then press the PLAY [R] key while

holding down the REC [O] key.

Playback of the rhythm pattern/rhythm song starts and is

recorded on the selected tracks.

11. When recording is complete, press the STOP [P]

key.

Rhythm recording ends. If you want to return to normal

recording, select [MASTER] on the screen of step 3.

ZOOM MRS-1266

Assigning marks within a song (Marker function)

You can assign up to 100 marks in a song at any desired location, and jump to a mark by pressing a key or by specifying the desired mark number. This is convenient when you want to repeatedly locate a specific point for playback during recording or mixdown.

Setting a mark

Here's how to assign a mark at the desired location in a song.

1. Locate the point at which you want to assign amark.

HINT

•A mark can be assigned either during playback or when stopped.

•You can also use the scrub function to locate the position with high precision.

2. Press the [MARK] key in the control section.

A mark will be assigned to the current location. When a mark has been assigned, the new mark number (01 - 99) will appear in the MARKER area in the upper right of the display.

PRJ 001 1266CD-R 03

The mark number is assigned automatically in ascending order from the beginning of the song. If you add a new mark between two existing marks, the subsequent marks will be renumbered.

Mark		Add a mark
	00	0102		03	04
number
Song
Mark	00	0102	03	04	05
number

Song

49