Zoom MRS-1266 REV, TR2, VcxRev, SEND REV, SEND, key), section, in the effect section, ■Adjusting the send level, 5-2Using the send/return effect

Quick Tour

5-2 Using the send/return effect

The send/return effect is internally connected to the send/ return loop of the mixer. The MRS-1266 allows you to use two types of send/return effects: reverb and chorus. The following diagram shows the signal flow of the send/return effect.

CHORUS/		Send
		CHORUS/
DELAY
SEND LEVEL		DELAY
REVERB		REVERB
SEND LEVEL
DRUM BASS 1 2	8 9/10 MASTER	Return

The amount of signal sent to each effect (send level) adjusts the depth of each send/return effect for each track or for the drum/bass sound. Raising the send level will increase the amount of signal that is sent to the effect, producing a deeper effect for that track.

In this example, we will select a send/return effect patch, and adjust the send level of each track to adjust the amount of reverb and chorus.

■Selecting the send/return effect patch

A newly created project contains 30 patches for reverb and chorus/delay. To select a patch, proceed as follows.

1. Press the [REVERB] key or [CHORUS/DELAY] keyin the effect section.

Press the [REVERB] key to select a reverb patch, or the [CHORUS/DELAY] key to select a chorus/delay patch. The display will indicate the patch that is currently selected for the effect you selected. The screen shown below is an example of what is shown when the [REVERB] key is pressed.

SEND REVVcxRev 8

Patch name Patch number

ZOOM MRS-1266

2. Turn the dial to select a patch.3. When you have finished selecting the patch, press the [EXIT] key.

The unit returns to the main screen. If desired, press the

[CHORUS/DELAY] key next and select a chorus/delay

patch.

■Adjusting the send level4. Press the [CHORUS/DELAY SEND] key or the[REVERB SEND] key in the track parameter

section.

Press the [REVERB SEND] key if you want to adjust the reverb send level, or the [CHORUS/DELAY SEND] key if you want to adjust the chorus/delay send level. When you press the key, the current effect send level for the track or drum/bass sound whose status key is lit appears on the display. For example, when the [REVERB SEND] key is pressed, a screen such as shown below appears.

TR2
REV	SEND		0
Track/sound	name
		Send level setting

5. Press the status key of the track whose send level

you want to adjust (or the [DRUM]/[BASS] status

key).

The send level value of the selected track or sound will be

displayed.

6. Press the PLAY [R] key, and while the song plays back, turn the dial to adjust the send level value.

7. Adjust the send level for other tracks and sounds in the same way.8. When you have finished making the settings, press the [EXIT] key.

The unit returns to the main screen.

35