Reference [Other Functions]

5. When the command has been executed, turn theunit off and then turn it on again.

The MRS-1266 will operate in normal mode.

Test/restore integrity of data on internal hard disk (ScanDisk)

This action serves to test the disk and perform restorative

action if necessary. Try this command when the unit operates

unstably.

NOTE

ScanDisk may not be able in all cases to restore damaged files. To guard against data loss, it is recommended to regularly back up data from the hard disk onto CD-R/RW discs.

1. Refer to steps 1 - 3 of "Basic maintenance procedure" to bring up the indication "ScanDisk" on the display. Then press the [ENTER] key.

The ScanDisk menu appears.

AutoRepråå ENT2. Use the cursor left/right keys to select the ScanDisk function.●AutoRepr (Auto Repair)

This function tests all files on the hard disk and automatically repairs damaged files.

●ChekFile (Check File)

This function only tests all files, but does not automatically repair them. If a problem is found, a message is displayed on the screen.

3. To execute the selected function, press the

[ENTER] key.

ScanDisk starts.

NOTE

Once ScanDisk has started, it cannot be interrupted by the

user. Never turn power to the unit off while ScanDisk is

running. Otherwise the hard disk may be destroyed.

4. When ScanDisk is completed, press the [EXIT] key.

The unit returns to the condition of step 1.

Overwriting the system file data (Factory Initialize)

This action overwrites the operating files such as system file. Projects created by the user are not affected by this operation. Try this command when the unit operates unstably after the above ScanDisk operation.

1. Refer to steps 1 - 3 of "Basic maintenance procedure" to bring up the indication "Init Fac" on the display. Then press the [ENTER] key.

The indication "Init Fac SURE?" appears on the display to confirm the operation.

Init Fac

SURE?

2. To carry out the initialization process, press the

[ENTER] key once more.

The factory initialize process starts. When it is complete, the unit returns to the condition of step 1

Formatting the hard disk

This action formats the hard disk and writes the operating files. All existing projects containing the demo song will be erased.

NOTE

Once erased, user-created projects cannot be restored. Use this function with extreme care. If you want to preserve projects, back them up to CD-R/RW disc first (→ p. 142).

1. Refer to steps 1 - 3 of "Basic maintenance procedure" to bring up the indication "Init ALL" on the display. Then press the [ENTER] key.

The indication "Init ALL SURE?" appears on the display to

confirm the operation.

ZOOM MRS-1266

158