Zoom MRS-1266 EOS, åPTN, PTN:002 08Beat03, pattern, [ENTER] key, ■To insert a new pattern, ■To delete rhythm pattern data, while the rhythm section is stopped

Reference [Rhythm]

pattern will play repeatedly. If you shorten the rhythm pattern, the song will switch to the next rhythm pattern before the current pattern has finished playing.

HINT

This operation will not affect the original rhythm pattern.

7. To finalize the selected rhythm pattern, press the

[ENTER] key.

The rhythm pattern data will be input at the current location. (The “EOS” indication is moved back by the number of input measures.)

PTN:002 08Beat03 0

001- 1

HINT

When rhythm pattern data is input, information other than

tempo will be input at the same location in the rhythm song.

8. Repeatedly press the cursor right key to move to

the location at which you will input the next rhythm

pattern.

Each time you press a cursor left/right key, the current location will move one measure backward or forward. When you advance to the end of the rhythm song, the display will indicate “EOS”.

åPTN
EOS	0

003- 1

9. Repeat this procedure to input rhythm patterns for the entire song.10. When input for one rhythm song is completed, press the STOP [P] key.

The REC [O] key goes out, and the unit returns to the rhythm song screen. If you wish to check the input result, press the PLAY [R] key.

ZOOM MRS-1266

11. To return to the main screen, press the [EXIT] keywhile the rhythm section is stopped.

To edit an input rhythm pattern, perform the following steps while the REC [O] key is lit.

■To re-select a pattern that you input

Use the cursor left/right keys to move to the desired rhythm pattern data, and turn the dial to select a new pattern.

If you go to a point where no pattern information is input (display shows “ PTN”), you can add rhythm pattern information to that point.

NOTE

Keep in mind that the newly added rhythm pattern information will remain valid until the next point where rhythm pattern information is input.

■To insert a new pattern

Use the cursor left/right keys to move to the location at which you want to insert rhythm pattern data, and execute steps 4 - 7. The rhythm pattern data will be inserted at the current location, and subsequent rhythm pattern data will be moved backward according to the length of that pattern.

Insert

PATTERN D

PATTERN A PATTERN B PATTERN C

PATTERN A PATTERN B PATTERN D PATTERN C

■To delete rhythm pattern data

Use the cursor left/right keys to move to the location at which you want to erase rhythm pattern data, and press the [DELETE/ERASE] key. The rhythm pattern data will be deleted, and the display will change to “PTN”, indicating that the preceding pattern will continue playing.

Delete

PATTERN A PATTERN B PATTERN C PATTERN D

PATTERN A PATTERN B ← PATTERN D

91