Lexmark X644E manual Menu item

Page 44

Using MFP menus

Menu item

Timeouts

Purpose

Specifies the amount of time the MFP waits to return to the home screen, receive an end- of-job message, or receive additional bytes of data from the computer.

Note: Wait Timeout is only available when using PostScript emulation. This menu value has no effect on PCL emulation print jobs.

Values and descriptions

Standby Mode

Touch the LCD screen or press any of the

Disabled

hard buttons to exit (wake up) from this mode.

Disabled—Disables Standby Mode.

1–240 (15*)

1–240—Specifies the amount of time in

 

 

minutes that the MFP waits before returning

 

to the home screen.

 

 

Power Saver Mode

It sets the number of minutes that pass after

Disabled

exiting Standby Mode before the MFP goes

into a reduced power state called Power

2–240 (60*)

Saver Mode.

 

If Standby Mode is disabled, which is

 

considered a setting of 0, then Power Saver

 

Mode is the number of minutes of inactivity

 

that occurs before entering Power Saver

 

Mode.

 

Print the menu settings page to determine the

 

current Power Saver setting. When the MFP is

 

in Power Saver Mode, it is still ready to

 

receive print jobs.

 

Disabled—Disables Power Saver Mode.

 

Disabled is not available if Energy Conserve is

 

set to On.

 

2–240 (60*)—Specifies the amount of time

 

after exiting Standby Mode or after finishing a

 

print job before the MFP goes into Power

 

Saver mode.

 

For example, select 15 to put the MFP in

 

Power Saver mode 15 minutes after it finishes

 

a print job. This uses much less energy, but

 

requires more warm-up time for the MFP.

 

Select 15 if your MFP shares an electrical

 

circuit with room lighting and you notice lights

 

flickering. Select a high value if the MFP is in

 

constant use. Under most circumstances, this

 

keeps the MFP ready to print with minimum

 

warm-up time. Select a value between 1 and

 

240 minutes for a balance between energy

 

consumption and a shorter warm-up period.

 

Note: When the MFP enters Power Saver

 

Mode, for the entire duration in this mode,

 

Screen Brightness is set to 15. Touch the LCD

 

screen or press any of the hard buttons to exit

 

(wake up) from this mode.

 

 

Screen Timeout

Disabled—Disables Screen Timeout.

15–300 (30*)

15–300—Specifies the amount of time in

 

seconds before the control panel returns to

 

the home screen due to inactivity.

 

 

Settings

44

Image 44
Contents X644e and X646e Edition January Contents Index 111 Using MFP menus Understanding the multifunction printer MFP control panelUsing MFP menus Callout Control panel item FunctionLCD Status IndicatesHome screen Copy Fax MailCallout number Button or screen item Function Processing, such as Close door or insert printFTP Button Button name FunctionJobs Using the LCD touch-screen buttonsCancel Sample screen one Information on LCD touch-screen buttonsFlatbed Button Button name Function or descriptionBack SubmitScan Submit Flatbed Sample screen two Down arrowSee Cancel Jobs on Cancel JobContinue Copy screen appears like Sample screen one onOther LCD touch-screen buttons DoneFeatures Feature Feature name DescriptionMenus Menu mapDefault Source Paper MenuPaper Size/Type Menu item Purpose Values and descriptionsLetter US Using MFP menus Configure MP Envelope EnhanceSubstitute Size Paper TexturePaper Weight Paper Loading Custom TypesCustom Names TypeSee Duplex Bind on page 68 for Universal SetupReports Network x Setup Network/Ports TCP/IPMTU DdnsIPv6 Mail Server Setup Using MFP menus Wireless Standard Network or NetworkMenu item Values PCLStandard USB or USB Using MFP menus Standard Parallel or Parallel Parallel Buffer size recommended Serial DTR DTR/DSRXON/XOFF XON/XOFF/DTRNetWare AppleTalk LexLink SettingsGeneral Settings YYYY-MM-DD MM-DD-YYYYDD-MM-YYYY Null Null LAAMenu item Job RAM Copy Settings See Duplex Bind on Default size needs to be pre-selected on the LCD Is next to the +. As shown, 5 is the current value Fax Settings Analog Fax SetupGeneral Fax Settings Alphanumeric keyboard onShift lock Search Space Clear Back Cancel AbcBind on page 68 for more PabxTone Fax Receive Settings MFPFax Log Settings Fax Server Setup TiffEdge. See Duplex Bind on page 68 for Jpeg Mail SettingsSee E-mail Server Setup on Portrait for the scan job, which means Duplex Bind on page 68 for more Custom Job scanning FTP Settings See Duplex Bind on page 68 for moreThis menu item applies to all scan Functions Transmission Adjusts the amount of shadow detail Print Settings Finishing MenuBack of the sheet even-numbered Called n-up or Paper Saver Horizontal Order Print onHorizontal Using MFP menus Quality Menu Using MFP menus Utilities Menu Setup Menu Clearing job accountingTouch Activate Hex Trace to Memory Full appearsDownload Target Specifies the storage location for PostScript Menu Using MFP menus PCL Emulation Menu But cannot be changed None-Source ignores the Select Using MFP menus Using MFP menus Html Menu Image MenuSee Function Access for more SecurityNtlm LdapSee Functions disabled transitional Password Using MFP menus See Create and Change Passwords on Or Not Registered Using MFP menus Create and Change Passwords Menu item Values and descriptions Pop-up messageYYYY-MM-DD Hhmm Set Date and TimeGMT Help Pages Manage Shortcuts Delete List Displaying 1 3Using MFP menus Status messages Message Meaning ActionUnderstanding MFP messages Tray x Empty Tray x LowTray x Missing WaitingCancel jobs messages Password and PIN messagesFax status messages Message MeaningTouch Continue Copy, e-mail, fax, FTP, and scan button messagesAttendance messages Clean scanner backing Clean scanner glassStrip Touch Finish job without further scanning ifTouch Automatically select media to override Size Type sizeLoad src with Custom Load src with sizeRestore held jobs? Load src with typeRemove paper from Standard output binEmul error, load Scan Document Too LongScanner ADF Cover Open OpenFeature Short paperInsufficient memory For Flash MemoryPpds font error ErrorIs too complex To printSoftware error DisabledInstalled Serial optionOptions installed Too many flashToo many trays AttachedUnsupported disk FormatAdvised Toner is low107 24x.yy Paper jam, check 24x.yy Paper jamYy Paper jam Scanner jamScanner jam, remove All originals fromScanner Replace all Originals if restartingFunctions disabled transitional messages Occurrence Message InformationIndex Index 113 114 115 116 117 118 119 120

X644E specifications

The Lexmark X644E is a multifunction printer designed for businesses seeking reliable performance and advanced features. This model is particularly well-suited for medium to large workgroups, offering an excellent balance between functionality and efficiency.

One of the standout features of the X644E is its multifunction capabilities, which include printing, scanning, copying, and faxing. This all-in-one device simplifies office workflows and reduces the need for multiple machines, saving valuable space. The X644E can produce high-quality black and white prints at speeds up to 45 pages per minute, ensuring that even large volumes can be handled without sacrificing performance.

The printer utilizes Lexmark's Advanced Laser Technology, which optimizes print quality and delivers sharp, professional documents. Its resolution of up to 1200 x 1200 dots per inch ensures that text is crisp and images are clear, making it ideal for producing business reports, presentations, and legal documents. The printer also supports various media sizes and types, including envelopes, labels, and heavier stock, providing versatility for different printing needs.

Another key characteristic of the X644E is its user-friendly interface. The device features a large color touchscreen that simplifies navigation and offers easy access to settings and features. Users can quickly select functions, adjust print settings, and manage jobs seamlessly.

The X644E supports network connectivity, allowing multiple users to access the printer simultaneously. It is compatible with both wired and wireless connections, providing flexibility for different office setups. Additionally, mobile printing capabilities enable users to print documents directly from their smartphones and tablets, enhancing convenience.

Security is a significant concern for businesses, and the Lexmark X644E addresses this with robust features. It includes secure printing options, password protection, and user access controls, ensuring that sensitive information remains protected.

In terms of cost-efficiency, the X644E utilizes high-capacity toner cartridges, reducing the frequency of replacements and lowering overall printing costs. This feature is particularly beneficial for organizations looking to optimize their printing budgets.

Overall, the Lexmark X644E stands out as a versatile and powerful multifunction printer. With its high-speed printing, advanced technologies, user-friendly interface, and security features, it meets the demands of modern office environments, making it a solid choice for any business looking to enhance productivity and efficiency.