Lexmark X644E manual Fax status messages, Cancel jobs messages, Password and PIN messages

Understanding MFP messages

Fax status messages

Message	Meaning
Answering	The MFP is answering a fax call.
Call complete	A fax call is completed.
Connect <x>bps	The fax is connected. <x> is the baud rate per second.
Dialing	A fax number is dialed. If the number is too long to fit on the screen
	only the word Dialing appears.
Fax failed	The fax failed to send.
Job stored for delayed transmission.	The scanning completes for a delayed send fax job.
Line busy	A fax number is dialed, but the fax line is busy.
No answer	A fax number is dialed, but no connection is made.
No dial tone	The MFP does not have a dial tone.
Queued for sending	The scanning process of a fax job completed, but it is not sent yet
	because another fax job is being sent or received. As this one job
	waits for its turn, this message appears for three seconds.
Receive complete	The MFP has received an entire fax job.
Receiving page [n]	The MFP receives page [n] of the fax job, where n is the number of the
	page received.
Sending page [n]	The MFP sends page [n] of the fax job, where n is the number of the
	page sent.
Set clock	The Real Time Clock is not set. This message appears if no other fax
	status message appears. It remains until the clock is set.
	Set the clock.
Waiting for redial	The MFP is waiting to redial the fax number.

Cancel jobs messages

Message	Meaning
Deleting selected job(s)	The Delete button is touched after jobs have been selected.
Job cannot be deleted	A job in the job list is touched, but it cannot be canceled.
No jobs selected	The Delete button is touched when no jobs are selected.

Password and PIN messages

Message	Meaning	Action
Invalid or incorrect password.	An incorrect password is entered.	Touch Continue to return to the screen to
		enter a correct password.
Invalid PIN.	An incorrect Personal	Touch Continue to return to the screen to
	Identification Number (PIN) is	enter a correct PIN.
	entered.

Fax status messages

95