Window / Patio Door Kit Installation
Your window kit has been designed to fit most standard “vertical” and “horizontal” window applications. Now with the addition of a 3rd slider section, (Fig.2b), it is possible to install this kit in a patio door application (up to a maximum height of 80"). Please refer to Fig. 2, Fig. 2a, & Fig. 2b for minimum and maximum openings. For vertical window and/or patio door applications,
Internal Water Tank Safety Feature
This unit is equipped with a
NOTE: The fan motor will continue to operate under this condition. This is normal, but no cooling or dehumidifying will occur until the tank is emptied and/or correctly installed (It may take several minutes before the compressor resumes normal operation).
Operating Instructions
Before Starting This Unit
1)Select a suitable location, making sure you have easy access to an electrical outlet.
2)Install the Flexible Exhaust Hose and the Adjustable Window/Patio Door Slider Kit as depicted in Fig. 2, Fig. 2a or Fig. 2b.
NOTE: Step 2 is required only while using the
AIR CONDITIONER MODE
3)Plug the unit into a 115 V /60 Hz grounded electrical outlet.
DO NOT USE A REGULAR EXTENSION CORD.
If it is necessary to use an extension cord with this unit, use an approved “air conditioner” extension cord only. (available at most local hardware stores)
4)Make sure the Water Tank is correctly positioned inside the cabinet otherwise the unit will not operate. Fig. 4.
Horizontal Window |
| ||
Window Slider Kit | Fig. 2 | ||
Minimum: 26 | 5 | /8" (67.5 cm) | |
|
| ||
Maximum: 48 3/8" (123 cm) |
| ||
Vertical |
|
Window |
|
| Fig. 2a |
Window Slider Kit | |
Minimum: | 26 5/8" (67.5 cm) |
Maximum: 48 3/8" (123 cm) | |
Patio |
|
Door |
|
| Fig. 2c |
| Patio Door Kit |
| Minimum: 26 5/8" (67.5 cm) |
Fig. 2b | Maximum: 80" (203 cm) |
Fig. 4
7