Auto-Timer Instructions, Setting the AUTO-ON Timer

Auto-Timer Instructions

NOTE: Auto-Timed programs cannot be set with the hand held remote control. The TIME OF DAY CLOCK must be set before the AUTO-TIMERfeature will operate.

The AUTO-TIMER feature offers a unique selection of multiple choice, fully automatic on/off (start/stop) programs between 0 - 23 hrs, 50 min. under any one mode of your Portable 4 Season Home Comfort unit. The programs are as follows:

a)Auto -Off:Pre-select a time that will turn off the unit (automatically) at a specified time (between 0 - 23 hrs, 50 min.). This function must be performed daily, (if required) as the program is automatically canceled/erased upon completion.

b)Auto-On:Pre-select a time that will turn on the unit (atomatically) at a specified time (between 0 - 23 hrs, 50 min.). This function must be performed daily, (if required) as the program is automatically canceled/erased upon completion.

c)Auto-On & Auto-Off:Pre-select a time that will turn on and turn off the unit (automatically) at specified times (between 0 - 23 hrs, 50 min.). This program contains built-in memory. Unlike programs a) and b) above. This program automatically stores into memory the selected times and will repeat daily, (same specified times) until the program is overridden and/or canceled. Any interruption to the electrical power supply

of the unit automatically cancels/erases all auto timed programs. In the event this should happen, you will be required to re-set

your program.

Setting the AUTO-ON TIMER

Before setting the AUTO-ONtimer, the TIME OF DAY CLOCK must be set/operational. You must also select the appropriate MODE and settings (FAN SPEED, TEMP, SWING etc.) you will require under the AUTO TIMED program.

1)Turn the unit “on” (I/O switch).

2)Select the appropriate MODE under which you want the unit to operate (Cool-Dry-Heat- Fan). Fig. 29.

3)Select the appropriate FAN SPEED setting, under which you want the unit to operate. (Hi,

Med, Low) (excluding Dehumidifying, as this mode has “1” fan speed setting only). Fig. 30.

4)If you desire oscillation (auto-swing) push the SWING key pad (the “air swing” symbol will be displayed in the display window). Fig. 31.

TIMER	ON	12:00	I/O	MODE
					TEMP./CLOCK
MODE	COOL				ADJ.
			FAN	ON
FAN SPEED HIGH
			SWING	TIMER
		00
	TEMP.			OFF	CLOCK

Mode
Selection					Fig. 29

TIMER	ON	12:00	I/O	MODE
					TEMP./CLOCK
MODE	COOL				ADJ.
			FAN	ON
FAN SPEED HIGH
				TIMER
		00
	TEMP.		SWING	OFF	CLOCK

Fan Speed

Fig. 30

TIMER	ON	12:00	I/O	MODE
					TEMP./CLOCK
MODE	COOL				ADJ.
			FAN	ON
FAN SPEED		HIGH
				TIMER
		TEMP. 00
SWING			SWING	OFF	CLOCK

Air Swing

Fig. 31