Cisco Systems OL-8376-01 manual Number of Tkip Local Fault threshold set for

Chapter 2 Fault Descriptions

IDS (Intrusion Detection System) Faults

Table 2-3	IDS Faults (continued)
Fault Description		Explanation	Related Setting	Recommended Action
Number of TKIP Local		The fault threshold set for the	IDS >	Verify that the fault threshold is set
MIC failures is Degraded.		degraded state has been exceeded.	Manage IDS Settings	correctly.
		When the fault is cleared, the	> IDS-802.11x	If the threshold is set correctly,
			>TKIP Local MIC
		following message displays:		review your network to determine the
			failures
		Number of TKIP Local MIC		action necessary to clear the fault
		failures is OK.		condition.
Number of TKIP Local		The fault threshold set for the
MIC failures is		overloaded state has been
Overloaded.		exceeded.
		When the fault is cleared, the
		following message displays:
		Number of TKIP Local MIC
		failures is OK.
Number of TKIP Remote		The fault threshold set for the	IDS >	Verify that the fault threshold is set
MIC failures is Degraded.		degraded state has been exceeded.	Manage IDS Settings	correctly.
		When the fault is cleared, the	> IDS-802.11x	If the threshold is set correctly,
			>TKIP Remote MIC
		following message displays:		review your network to determine the
			failures
		Number of TKIP Remote MIC		action necessary to clear the fault
		failures is OK.		condition.
Number of TKIP Remote		The fault threshold set for the
MIC failures is		overloaded state has been
Overloaded.		exceeded.
		When the fault is cleared, the
		following message displays:
		Number of TKIP Remote MIC
		failures is OK.
Number of TKIP replay		The fault threshold set for the	IDS >	Verify that the fault threshold is set
errors is Degraded.		degraded state has been exceeded.	Manage IDS Settings	correctly.
		When the fault is cleared, the	> IDS-802.11x	If the threshold is set correctly,
			>TKIP Replays
		following message displays:		review your network to determine the
			Detected
		Number of TKIP replay errors is		action necessary to clear the fault
		OK.		condition.
Number of TKIP replay		The fault threshold set for the
errors is Overloaded.		overloaded state has been
		exceeded.
		When the fault is cleared, the
		following message displays:
		Number of TKIP replay errors is
		OK.

FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

OL-8376-01 2-21