3Com 5101M-MGT installation and operation guide Showing Counter Statistics

Showing Counter Statistics

Once the EMM is assigned to a network, it continuously records and updates traffic and error statistics on all Ethernet stations, ports, and the network to which it is assigned. The SHOW COUNTER command can be issued for a module, port, or network.

Issue the SHOW COUNTER command to display the total traffic and error statistics recorded since either a module or port was first installed, or since the last time the counters were cleared (using the CLEAR COUNTER command).

Use the SHOW COUNTER MODULE command as shown to display traffic and error statistics for the module in slot 3.

ONline> show counter module 3			[ENTER]
Non-zero counters for network ETHERNET_1				on 09 Aug 93:
Slot	Frames	Bcast	CRC Err	AlignErr Collisions
Time	Octets	Mcast	TooLongErr	Remote

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

3	1500	500	0	162	3
18:17:12	9000	1325	0

Use the SHOW COUNTER PORT command as shown to report traffic and error statistics for the ports on module 3.

ONline> show counter port 3.all			[ENTER]
Non-zero counters for network ETHERNET_1 on 09 Aug 93:
Slot.Port	Frames	Bcast	CRC Err	AlignErr Collisions
Time	Octets	Mcast TooLongErr		Remote
	LastSourceAddr		Changes	LastErrorAddr

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

3.1	1200	350	0	12	1
18:16:28	8600	125	0
	08-34-8e-41-20-50		13	08-12-03-3e-74-06
3.2	150	75	0	75	1
18:16:28	200	600	0
	08-04-23-15-10-67		4	08-40-65-8e-30-32
3.3	150	75	0	75	1
18:16:28	200	600	0
	08-75-34-05-30-8d		7	08-35-46-75-60-32

Startup and Management Functions 3 - 27