
Table 3-1. Quick Reference for Getting Started (Continued)
| Procedure | Command |
|
|
|
3. | Module Configuration | SET MODULE |
|
| MASTERSHIP_PRIORITY |
|
| SET MODULE NETWORK |
|
| SET MODULE RING_SPEED |
|
|
|
4. | Port Configuration | SET PORT |
|
| SET PORT MODE |
|
| SET SECURITY PORT (Advanced |
|
| EMM only) |
|
|
|
5. | Save All Configuration Values | SAVE ALL |
6.Monitor the Network and Device with SHOW commands
❑ Device Information |
| |
SHOW DEVICE | ||
Module Information | ||
SHOW MODULE | ||
Port Information | ||
SHOW PORT | ||
Concentrator Information | ||
SHOW CONCENTRATOR | ||
Counter Statistics | ||
SHOW COUNTER MODULE | ||
| ||
| SHOW COUNTER PORT | |
❑ EMM Traffic Statistics |
| |
SHOW COUNTER NETWORK | ||
|
Saving and Reverting Configuration Values
When you make configuration changes using the SET command, they are effective immediately but are not saved permanently. To save commands permanently, use the SAVE command. Only saved values are in effect upon reset of the EMM or the concentrator. You can issue the SAVE ALL command to save all current concentrator configuration values previously established by the SET command for all categories. Or you may issue a specific SAVE command to save the configurations of only one group.
Startup and Management Functions 3 - 3