
Warning: Do not interrupt power to the concentrator during the download process or you may corrupt the Flash EPROM.
1.Make a backup copy of the 3Com UDK diskette.
2.Place the 3Com UDK diskette in the floppy drive and change to that drive by typing a: or b:.
3.Type the command UDK and press [ENTER] to display the initial installation screen as shown in Figure
A:> UDK [ENTER]
******************************************************************* | |||
****************** |
| Chipcom CORPORATION | ****************** |
|
|
| |
| Update Distribution Kit | Copyright 199X Chipcom Corporation |
|
This Update Distribution Kit will start ProCommso you can download new software to your 3Com device. Make sure you follow the instructions carefully to avoid downloading the wrong file to your device. Downloading the wrong file may damage the device.
*******************************************************************
Enter the Source Drive :
Enter the ProCcomm Drive :
Start Procomm
Press ENTER to accept the current drive selections and start ProComm.
, TAB: Next Field |
| : Previous Filed Enter: Accept ESC: Quit |
| ||
|
|
|
Figure 5-4. Initial UDK Installation Screen
4.Enter the letter of the source drive (where you inserted the 3Com
UDK diskette) following the “Enter the Source Drive:” prompt. Then press the Down Arrow key (↓) or [TAB] to move the cursor to the next field.
Software Download Instructions 5 - 9