2.Connect the provided
You may also use Telnet or Remote_Login to perform inband downloads to an Advanced EMM. By establishing a remote session from an Advanced EMM to another EMM, you may issue TFTP commands and perform the download remotely.
3.Configure the TFTP parameters by issuing the following three management commands as shown below. Note that these parameters must be set for each EMM to be updated. To update multiple EMMs, you must log in to or establish a Telnet session with the next EMM to be updated and issue the TFTP commands for that EMM.
ONline> set tftp file_name | [ENTER] |
ONline> set tftp server_ip_address [ENTER]
4.If you are performing the download from Maintenance mode, you must also issue the SET DOWNLOAD NETWORK command to configure the EMM to the network to which the server is connected.
5.Issue the SHOW TFTP command as shown to verify the TFTP parameters previously set.
ONline> show tftp | [ENTER] | ||
TFTP Server IP Address: | nnn.nnn.nnn.nnn | ||
TFTP | File Name: |
| emmv400.bin |
TFTP | Result: |
| CLEAR |
Software Download Instructions 5 - 17
