Ports - The EMM can assign each port on a per-port switching ONline module to one of the available networks. Reconfiguration of network assignments can be done at any time, without removing the module from the concentrator or disrupting other configuration settings.

Override Control - The EMM can override all ONline module dip switch settings.

Terminal - EMM terminal configuration values can be modified to meet your particular application requirements.

Security - The EMM address-to-port security feature enables you to assign a maximum of four MAC addresses to a port. Whenever a device assignment is changed, the EMM is alerted to the change in MAC Address, sends a trap to the designated workstation, and automatically disables that port.

Fault Tolerance - The EMM can assign the ports of some modules (e.g., Fiber Module, 10BASE-T Module) as redundant pairs in order to provide fault-tolerant links between concentrators or between devices (when using Fault-Tolerant Transceivers).

Establishing the User Password

Use the following command to establish a user password. Note that you must be logged in as administrator to change the user password. The default user password is [ENTER].

ONline> set device password user

[ENTER]

Enter current administrator password: {administrator password} [ENTER]

New password:

{new

user

password}

[ENTER]

Verify:

{new

user

password}

[ENTER]

Startup and Management Functions 3 - 11

Page 51
Image 51
3Com 5101M-MGT installation and operation guide Establishing the User Password