Downloading the New Software
Use the following procedure to download software to the EMM.
1.Press [ENTER] to display the ONline> prompt and then log in to the EMM as the system administrator.
2.Type the MAINTAIN command to enter maintenance mode where the download can be completed.
ONline> maintain | [ENTER] |
Enter administrator password:
Enter the administrator password for that EMM and the following is displayed:
Network agent executive system controller (vx.x)
Copyright 199x Chipcom Corporation
>>
3.Type the following download command and press [ENTER] to begin the download procedure.
>>download out_of_band [ENTER]
WARNING:
Download will erase your current operational code.
You will need the following to replace the software:
1.PC running ProComm communications software.
2.Chipcom Network Management Module software media.
3.The serial number of the Upgrade Distribution Kit.
4.Chipcom Key Code, which is provided by completing the UDK fax form and faxing it to 3Com at
Management Module's ID number: 3658117
If you are positive you want to perform a download, enter the 'download out_of_band' command again within 10 seconds. Otherwise the sequence will be aborted.
>>
Software Download Instructions 5 - 11
