1 Installing Printer Software in Windows
This chapter includes:
•Installing Printer Software
•Reinstalling Printer Software
•Removing Printer Software
•Installing mono printer driver
NOTE: The following procedure is based on Windows XP, for other operating systems, refer to the corresponding Windows user's guide or online help.
Installing Printer Software
You can install the printer software for local printing or network printing. To install the printer software on the computer, perform the appropriate installation procedure depending on the printer in use.
A printer driver is software that lets your computer communicate with your printer. The procedure to install drivers may differ depending on the operating system you are using.
All applications should be closed on your PC before beginning installation.
Installing Software for Local Printing
A local printer is a printer directly attached to your computer using the printer cable supplied with your printer, such as a USB or parallel cable. If your printer is attached to a network, skip this step and go to “Installing Software for Network Printing” on page 8.
You can install the printer software using the typical or custom method.
NOTE: If the “Found New Hardware Wizard” window appears during the installation procedure, click 
in the upper right corner of the box to close the window, or click Cancel.
Typical Installation
This is recommended for most users. All components necessary for printer operations will be installed.
1Make sure that the printer is connected to your computer and powered on.
2Insert the supplied
The
If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.
If you use Windows Vista, Windows 7 and Windows 2008 Server R2 click Start → All programs → Accessories → Run.
Type X:\Setup.exe replacing “X” with the letter which represents your drive and click OK and type .
If the AutoPlay window appears in Windows Vista, Windows 7 and Windows 2008 Server R2, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control window.
3Click Next.
• If necessary, select a language from the
5
