5Select Typical installation for a network printer, and then click Next.
6The list of printers available on the network appears. Select the printer you want to install from the list and then click Next.
•If you click the Advanced button, you can search a printer with the SNMP Community Name. Default name is ‘public’.
•If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer.
To verify your printer’s IP address or the MAC address, print a Network Configuration page. (See page 13.1 for "Printing a machine report")
•To find a shared network printer (UNC Path), select Shared Printer [UNC] and enter the shared name manually or find a shared printer by clicking the Browse button.
Note
• If you are not sure of IP address, contact your network administrator or print network information. (See page 13.1 for "Printing a machine report")
•If you cannot find your machine in network, please turn off the firewall and click Update.
7After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung printers in order to receive information from Samsung. If you so desire, select the corresponding checkbox(es) and click Finish.
Note
• If your printer does not work properly after the installation, try to reinstall the printer driver. See Software section.
•During the printer driver installation process, the driver installer detects the location information for your operating system and sets the default paper size for your machine. If you use a different Windows location, you must change the paper size to match the paper you usually use. Go to printer properties to change the paper size after installation is complete.
Using the SetIP program
This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. Especially, it is for the network administrator to set several network IPs at the same time. The following procedure is based on windows XP.
Note
• You can only use SetIP program when your machine is connected to a network.
•You can only use IPv4 setting for Set IP.
•If you are in a
Installing the program
1Insert the driver CD provided along with your machine. When the driver CD runs automatically, close the window.
2Start Windows Explorer and open the X drive. (X represents your
3Double click Application > SetIP.
4Double click Setup.exe to install this program.
5Select the language.
6Follow the instructions in the window and complete the installation.
Starting the program
7From the Windows Start menu, select Programs > Samsung Printers > SetIP > SetIP.
3.4 <Getting Started>
