Samsung CLX-8540ND Changing the scan feature settings, Original Size, Duplex, Resolution, Feature

Changing the scan feature settings

This part explains how to adjust the document settings for each scan job, such as resolution, duplex, original size, type, color mode, darkness, and more. The options you change will be maintained for a certain time, but after that period, the options will be reset to default values.

Duplex

This feature especially applies when the original documents to be scanned are two-sided. You can select whether the machine scans only one side of the paper or both sides of the paper.

Press Scan to Server > the Basic tab > Duplex.

Or, Press Scan to Email > the Options tab > Duplex. Use left/right arrows to toggle the values.

•1 Sided: For originals that are printed on one side only.

•2 Sided: For originals that are printed on both sides.

•2 Sided, Rotate Side 2: For originals that are printed on both sides. But the back is rotated 180 degrees.

Note

To use 2 Sided and 2 Sided, Rotate Side 2, you have to load the originals on the DADF. Because, if the machine can not detect the original on DADF, automatically changes the option to 1 Sided.

Resolution

You can adjust document resolution.

Press Scan to Server > the Basic tab > Resolution.

Or, Press Scan to Email > the Options tab > Resolution.

Use left/right arrows to toggle the values. The higher value you select the clear result you get. But the scanning time may take longer.

Commonly, 100 dpi , 200 dpi and 300 dpi resolution are available only when Color Mode is set to Color or Gray. The following table shows detailed information feature, resolution and file format options.

Feature	Resolution (dpi)	File Format
Scan to Email	100, 200, 300, 600(B/W)	PDF, Single-Page
	100,200,300	TIFF, Multi-Page TIFF,
		JPEG
	(Gray,Color)
Scan to PC	75, 150, 200, 300, 600,	PDF, Single-Page
		TIFF, Multi-Page TIFF,
		JPEG

Feature	Resolution (dpi)	File Format
Scan to Server	100, 200, 300, 600(B/W)	PDF, Single-Page
	100,200,300	TIFF, Multi-Page TIFF,
		JPEG
	(Gray,Color)

Original Size

You can specify the scanning area on the originals by selecting the pre- defined size, or putting in the margin value or Auto. If you set this option to Auto, the machine senses and determines the size of the original.

Press Scan to Server > the Advanced tab > Original Size.

Or, Press Scan to Email > the Options tab > Original Size. Use up/ down arrows to go to the next screen. Select the appropriate option and press OK.

Original Type

You can set the original document type in order to enhance the quality of a document being scanned.

Press Scan to Server > the Image tab > Original Type.

Or, Press Scan to Email > the Options tab > Original Type.

Select the appropriate option and press OK.

•Text: For originals that have text or line art.

•Text/Photo: For originals that have both text and photographs together.

•Photo: For originals that are continuous tone photographs.

7.8 <Scanning>