Samsung CLX-8540ND manual Understanding the Status LED, Power Saver button, Interrupt button

•Job Type: Displays details of the active job, such as job type, recipient phone number and other information.

•Detail: Shows the detailed information of the selected option on the Current Job, Completed Job and Active Notice list.

•Delete: Removes the selected job from the list.

•Delete All: Removes all the jobs from the list.

•Close: Closes the job status window and switches to previous view.

Power Saver button

When the machine is not in use, save electricity with the provided power save mode. Pressing this button puts the machine into power save mode. (Page 3.6)

If you press Power Saver button for more than two seconds, a window appears, requesting that you turn the power off. If you choose Yes, the power is turned off. This button can also be used to turn the button on.

	Status			Description
Off			•	The machine is not in the power save mode.
			•	The machine is in the low power save mode.
Blue		On	The machine is in the power save mode.
		Blink	The machine is in the ready power save mode.

Interrupt button

When you press Interrupt button, the machine goes into interrupt mode which means it stops a printing job for urgent copy job. When the urgent copy job completes, the previous printing job continues.

	Status		Description
Off			The machine is not in interrupt printing mode.
Blue		On	The machine is in interrupt printing mode.

Note

Interrupt mode is resumed at default value (Off) after the machine is shut down or reset.

Understanding the Status LED

When the problem occurs, the Status LED indicates the machine's condition by the light color of it's action.

Status

	Status		Description
Off		•	The machine is off-line.
		•	The machine is in power save mode. When
			data is received, or any button is pressed, it
			switches to on-line automatically.

Status			Description
Green	On	The machine is on-line and can be used.
	Blinking	•	When the backlight slowly blinks, the machine
			is receiving data from the computer.
		• When the backlight blinks rapidly, the machine
			is printing data.
Red	On	•	The imaging unit is out of lifespan. Remove
			the old imaging unit and install a new one.
			(Page 13.6)
		•	A toner cartridge has reached its estimated
			cartridge lifea. Remove the old toner cartridge
			and install a new one. (Page 13.4)
		•	A paper jam has occurred. (Page 14.3)
		•	The cover is opened. Close the cover.
		•	There is no paper in the tray. Load paper in
			the tray.
		•	The machine has stopped due to a major
			error. Check the display message.
			(Page 14.10)
		•	The waste toner container not installated in
			the machine, or full waste toner container.
			(Page 13.8)
	Blinking	•	A minor error has occurred and the machine
			is waiting the error to be cleared. Check the
			display message. When the problem is
			cleared, the machine resumes.
		•	Small amount of toner is left in the cartridge.
			The estimated cartridge life of toner is close.
			You can temporarily improve print quality by
			redistributing the toner. (Page 13.4)

a. Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of print-outs and is designed pursuant to ISO/IEC 19798. (See General specifications.) The number of pages may be affected by operating environment, printing interval, media type, and media size. Some amount of toner may remain in the cartridge even when “End of life, Replace with new [xxx] toner cartridge” appears and the printer stops printing.

Note

Check the message on the display screen, and follow the instruction on the message or refer to Troubleshooting part. (Page 14.1) If the problem persists, call for service.

1.7 <Introduction>