2Select Admin Setting. When the login message pops up, then enter password and press OK. (Page 3.5)

3Press the Setup tab > Fax Setup > Secure Receive.

4Select On.

5Enter Passcode with 4 digit number using the number keypad on the control panel.

Note

To deactivate the Secure Receive feature, press Off. In this case, the received fax will be printed out.

Printing received faxes on both sides of the paper

Set this duplex feature to save paper. When the machine prints the received fax data, it prints them on both sides of the paper.

1Press Machine Setup on the control panel.

2Select Admin Setting. When the login message pops up, then enter password and press OK. (Page 3.5)

3Press the Setup tab > Fax Setup > Received Fax Printing > Duplex.

4Select appropriate option.

Off: Prints only one side of the paper.

Long Edge: Prints both sides of the paper, however the binding will be the long edge.

Short Edge: Prints both sides of the paper, however the binding will be the short edge.

5Press OK.

Receiving faxes in memory

Since your machine is a multi-tasking device, it can receive faxes while you are making copies or printing. If you receive a fax while you are copying or printing, your machine stores incoming faxes in its memory. Then, as soon as you finish copying or printing, the machine automatically prints the fax.

Adjusting the document settings

Before sending a fax, you can adjust the document settings, such as resolution, darkness, color, duplex and so forth. Refer to explanation of this section.

Note

The document setting herein is for only current job. If you want to change the default setting on document settings, refer to Admin Setting > General tab > Default Settings. (Page 12.2)

Duplex

This function is especially intended for two-sided originals. You can select whether the machine sends the fax on one side or both sides of the paper.

Load the originals onto the DADF to use this function.

Press Fax > the Basic tab > Duplex. Use left/right arrows to toggle the value.

1 Sided: Is for the originals that are printed on one side only.

2 Sided: Is for the originals that are printed on both sides.

Resolution

Changing the resolution setting affects the appearance of the received document.

Press Fax > the Basic tab > Resolution. Use left/right arrows to toggle the values.

Standard: Usually recommended for originals with text. This option will reduce the transmission time.

Fine: Recommended for the originals containing with small characters, thin lines, or text that was printed using a dot-matrix printer.

Super Fine: Recommended for originals containing with extremely fine detail, this option is enabled only if the receiving machine also supports a Super Fine resolution.

Note

For memory transmission, Super Fine mode is not available. The resolution setting is automatically changed to Fine.

6.7 <Faxing (Optional)>

Page 62
Image 62
Samsung CLX-8540ND Adjusting the document settings, Printing received faxes on both sides of the paper, Duplex, Resolution