|
| Condition |
| Suggested solutions |
|
|
|
|
|
Page skew | • | Ensure that the paper is loaded properly. | ||
|
|
| • | Check the paper type and quality. |
|
|
|
| (Page 4.3) |
|
|
| • | Ensure that the paper or other material is |
|
|
|
| loaded correctly and the guides are not too |
|
|
|
| tight or too loose against the paper stack. |
|
|
|
|
|
|
|
|
|
|
Curl or wave | • | Ensure that the paper is loaded properly. |
| • | Check the paper type and quality. Both high |
|
| temperature and humidity can cause paper |
|
| curl. (Page 4.3) |
| • Turn the stack of paper over in the tray. Also | |
|
| try rotating the paper 180° in the tray. |
Wrinkles or creases • Ensure that the paper is loaded properly.
• Check the paper type and quality. (Page 4.3)
•Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
Back of printouts | Check for leaking toner. Clean the inside of |
are dirty | the machine. Contact a service |
| representative. |
Solid Color or | • | The imaging unit may not be installed | ||
Black pages |
| properly. Remove the cartridge and reinsert | ||
|
|
|
| it. |
|
|
|
| |
|
|
| • The imaging unit may be defective and need | |
|
|
|
| replacing. Remove the imaging unit and |
|
|
|
| install a new one. (Page 13.4) |
|
|
| • | The machine may require repair. Contact a |
|
|
|
| service representative. |
|
|
|
|
|
|
|
|
|
|
|
| Condition |
| Suggested solutions | |
|
|
|
|
|
|
Loose toner | • | Clean the inside of the machine. Contact a | |||
|
|
|
|
| service representative. |
|
|
|
| • | Check the paper type and quality. |
|
|
|
|
| (Page 4.3) |
|
|
|
| • | Remove the imaging unit and then, install a |
|
|
|
|
| new one. (Page 13.4) |
|
|
|
| • | If the problem persists, the machine may |
|
|
|
|
| require repair. Contact a service |
|
|
|
|
| representative. |
|
|
|
|
|
|
Character Voids | Character voids are white areas within parts of | ||||
|
|
|
| characters that should be solid black: | |
|
|
|
| • | If you are using transparencies, try another |
|
|
|
|
| type of transparency. Because of the |
|
|
|
|
| composition of transparencies, some |
|
|
|
|
| character voids are normal. |
|
|
|
| • | You may be printing on the wrong surface of |
|
|
|
|
| the paper. Remove the paper and turn it |
|
|
|
|
| around. |
|
|
|
| • | The paper may not meet paper |
|
|
|
| ||
|
|
|
|
| specifications. (Page 4.3) |
|
|
|
|
| |
Horizontal stripes | If horizontally aligned black streaks or smears | ||||
|
|
|
| appear: | |
|
|
|
| • | The imaging unit may be installed |
|
|
|
|
| improperly. Remove the cartridge and |
|
|
|
|
| reinsert it. |
|
|
|
| • | The imaging unit may be defective. Remove |
|
|
|
|
| the imaging unit and install a new one. |
|
|
|
|
| |
|
|
|
|
| (Page 13.6) |
|
|
|
| • | If the problem persists, the machine may |
|
|
|
|
| require repair. Contact a service |
|
|
|
|
| |
|
|
|
|
| representative. |
|
|
|
|
| |
Curl | If the printed paper is curled or paper does not | ||||
|
|
|
| feed into the machine: | |
|
|
|
| • Turn the stack of paper over in the tray. Also | |
|
|
|
|
| try rotating the paper 180° in the tray. |
An unknown image | Your machine is probably being used at an |
repetitively appears | altitude of 1,000 m (3,281ft) or above. The |
on the next few | high altitude may affect the print quality from |
sheets or loose | loose toner or light imaging. You can set this |
toner, light print, or | option through Printer Settings Utility or the |
contamination | Printer Tab in printer driver’s properties. See |
occurs. | page 3.5. |
