Line Keys and Softkeys

Empty Key

You can set a softkey to force a blank entry on the IP phone display for a specific key. You do this by setting the softkey to "empty". The keys are added in order (from key 1 to key 20) after any hard-coded keys have been added. If a particular key is not defined, it is ignored.

Configuring an Empty Key

Aastra Web UI

Use the following procedure to configure an Empty softkey on the 6757i phone.

1.Click on Operation->Softkeys and XML. or

Click on Operation->Expansion Module <N>.

Softkeys

2.Select from “Key 1” through “Key 10” on the Top keys. or

Select from "Key 1" through "Key 20" on the Bottom keys.

3.In the "Type" field, select Empty.

4.(Bottom Softkeys) In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.

144

Model 6757i IP Phone User Guide

Page 150
Image 150
Aastra Telecom 6757I manual Model 6757i IP Phone User Guide, Configuring an Empty Key